| Product # | Name | Description | Price |
Category: Top / accessories / aeroscreen / | |||
| 234 | Auster aeroscreen | Auster pattern. polished aluminium frame and brackets. laminated glass, brackets for mounting on to wood fitting the contour of the bulkhead. overall size approx 355mm x 180mm. fully adjustable. squared glass as standard but curved top glass if prefered. |
£74.80 for 1 each |
| 899 | Auster aeroscreen | Auster pattern frame but with large wing nut on end for fixing adjustment. overall size approx 380mm x 180mm. aluminium frame and fittings. squared glass fitted as standard however curved top glass if required option. |
£78.00 for 1 each |
| CA1051 | Auster aeroscreen | Auster pattern. polished aluminium frame and brackets. laminated glass, brackets for mounting on to wood fitting the contour of the bulkhead. overall frame size approx 336mm x 170mm (mounting legs extra) fully adjustable. curved glass as standard but square top glass if prefered. |
£74.80 for 1 each |
| 460 | Brooklands aeroscreen | Brookland type aero screen, overall width approx 400mm height approx 190mm, fitted with curved top laminated glass as standard (squared glass as an alternative) polished aluminium frame, chrome fittings etc. has unchanged for many years. to cut down the individual email enquiries seeking 'post' costs for this part to Australia and US etc we advise. we can despach one screen by air packet mail at approx post/pack cost of £22. we can use this method to despatch two screens individually, each as one packet. alternative two screens despatched together by air parcel mail (tracked) at approx North America £50 and Far East/ Australia £65 |
£46.50 for 1 each |
| CA1150 | wind deflector sidescreen | perspex wind deflector with fixings to fit MG or alternatively Morgan (please state which) and also may be used on many other vehicles. the wind deflector screen fixes with brackets to the end of the sports car type windshield frame. sold in pairs only. approx 305mm tall on mounting edge. |
£59.50 for 1 pair |
Category: Top / accessories / aeroscreen / spare / | |||
| 460B | aeroscreen banjo | replacement banjo mount for end of Brooklands aeroscreen, chromium plated |
£4.00 for 1 each |
| 234G | aeroscreen glass | replacement laminated squared top aeroscreen glass, approx 300mm x 152mm. |
£12.50 for 1 each |
| 460G | aeroscreen glass | replacement laminated curved top glass for Brooklands aeroscreen approx 298mm x 154mm. |
£12.50 for 1 each |
| 460L | aeroscreen leg | replacement mounting leg for Brooklands aeroscreen, chromium plated, approx 45mm tall |
£6.00 for 1 each |
| 460N | aeroscreen nut | replacement end wing/eared nut for Brooklands aeroscreen, chromium plated |
£5.00 for 1 each |
Category: Top / accessories / badge bar / | |||
| 770 | badge bar | 19mm diameter stainless steel bar, 560mm long -chrome on brass clips and legs. plug ends can be removed so item can be cut shorter if required. supplied as a unit with fastenings (bar, two mounting legs, four badge clips) . |
£25.50 for 1 each |
| 696 | badge bar clip | chrome on brass badge bar clip, two bolt fixing for standard 19mm round bar. stamped DESMO england. |
£4.00 for 1 each |
| 885 | badge bar clip | badge bar clip, two bolt fixing for 25mm dia bar chrome on brass |
£4.00 for 1 each |
| CA892 | badge bar lamp bracket | badge bar bracket, or can be used for small spotlamp. as Desmo 613 lamp clamp. suitable for 19mm but will fit 25mm bar. lamp hole 15.5mm dia. |
£7.50 for 1 each |
| 770L | badge bar leg | chrome plate on brass leg for 19mm badge bar tube |
£10.00 for 1 each |
| 256 | clamp bracket | stainless steel clamp brackets suitable for several uses when a plate need be fixed to a round tube. 1/4" (6mm) bolt, round bar size minimum of 19mm - maximum on 25mm diameter. offered in set of two complete units only. particularly suitable for rally plate, number plate etc. |
£8.60 for 1 pair |
| CA281 | spotlamp mounting bracket | spot lamp mounting bracket, as Desmo part 613. chrome body, single mount bolt clamp for fitting to 19mm round bar. lamp mounting hole 15mm. overall size 63mm x 32mm. |
£10.70 for 1 each |
Category: Top / accessories / badges / | |||
| 305 | AA Commercial vehicle badge | reproduction AA Commercial cehicle members badge, from approx 1930 to 1967. chrome finish. |
£17.35 for 1 each |
| CA1019A | Automobile Association badge | reproduction of AA badge as issued in 1920s' . we offer this Automobile Association badge. two mounting holes to base. |
£41.50 for 1 each |
| CA1019B | Automobile Association badge | reproduction of the first AA badge, brass only. this early Automobile Association badge carries the signature of the then secretary of the club, Stenson Cooke, and was first issued in May 1906. supplied undrilled. |
£69.50 for 1 each |
| 378BOA | Boa-Constrictor Horn plaque | Boa-Constrictor Horn plaque - black printed on brass. marked Boa-Constrictor Horn, licensed under Brit. patent no 27746/07, picture of snake, British Manufacture measures 51mm x 26mm a nice finishing detail - limited availability |
£15.00 for 1 each |
| CA1459 | Brooklands badge set | the full set of 8 fabulous reproductions of Brooklands badges. vitreous coloured enamels on to a brass base as original. marked with the legend '100th Anniversary of Brooklands 1907-2007' and produced in a very limited set edition for 2007. the full set contains Brooklands School of Flying Ltd, Brooklands Aero Club, Brooklands Flying Club (nickel & gilt), Brooklands BARC, Brooklands 120MPH, Brooklands 130MPH and Brooklands Committee badges. two bolt holes to base for fixing to panel or fitting with badge bar clips. made by the original makers Toye, Kenning & Spencer in their Birmingham factory. very limited availability. |
£520.00 for 1 set of 8 |
| CA1455-COM | Brooklands BARC Committee badge | a fabulous reproduction of Brooklands Committee badge. vitreous coloured enamels on to a brass base as original. the design shows two racing cars on the banked circuit passing under the bridge. two bolt holes to base for fixing to panel or fitting with badge bar clips. |
£65.00 for 1 each |
| CA1457 | Brooklands Flying Club badge | a fabulous reproduction of Brooklands Flying Club badge. vitreous coloured enamels on to a brass base as original. the Brooklands Flying Club was formed in the 1930's. the design shows a single seat mono-plane flying directly over the Brooklands Flying Club building. (which remains today). two bolt holes to base for fixing to panel or fitting with badge bar clips. |
£52.00 for 1 each |
| CA1458 | Brooklands School of Flying badge | a fabulous reproduction of Brooklands School of Flying badge. vitreous coloured enamels on to a brass base as original. the Brooklands School of Flying was formed in the late 1920's, then in the 1930's the club was formed into a Limited Company - this badge is from that era. two bolt holes to base for fixing to panel or fitting with badge bar clips. |
£65.00 for 1 ea |
| 591AU | enamel nationality flag badge / plaque Australia | patriotic national flag badge of Australia, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591AT | enamel nationality flag badge / plaque Austria | patriotic national flag badge of Austria, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591BE | enamel nationality flag badge / plaque Belgium | patriotic national flag badge of Belgium, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591CA | enamel nationality flag badge / plaque Canada | patriotic national flag badge of Canada, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591CZ | enamel nationality flag badge / plaque Czech Republic | patriotic national flag badge of Czech Republic, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591DK | enamel nationality flag badge / plaque Denmark | patriotic national flag badge of Denmark, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591E | enamel nationality flag badge / plaque England | patriotic national flag badge of England, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591FI | enamel nationality flag badge / plaque Finland | patriotic national flag badge of Finland, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591FR | enamel nationality flag badge / plaque France | patriotic national flag badge of France, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591DE | enamel nationality flag badge / plaque Germany | patriotic national flag badge of Germany, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591GR | enamel nationality flag badge / plaque Greece | patriotic national flag badge of Greece, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591GG | enamel nationality flag badge / plaque Guernsey | patriotic national flag badge of Guernsey, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591NL | enamel nationality flag badge / plaque Holland | patriotic national flag badge of Holland / Netherlands, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591IE | enamel nationality flag badge / plaque Ireland | patriotic national flag badge of Ireland / Eire, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591IM | enamel nationality flag badge / plaque Isle of Man | patriotic national flag badge of Isle of Man, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591IT | enamel nationality flag badge / plaque Italy | patriotic national flag badge of Italy, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591JE | enamel nationality flag badge / plaque Jersey | patriotic national flag badge of Jersey, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591MT | enamel nationality flag badge / plaque Malta GC | patriotic national flag badge of Malta GC, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591MC | enamel nationality flag badge / plaque Monaco | patriotic national flag badge of Monaco, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591NZ | enamel nationality flag badge / plaque New Zealand | patriotic national flag badge of New Zealand, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591NO | enamel nationality flag badge / plaque Norway | patriotic national flag badge of Norway, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591PL | enamel nationality flag badge / plaque Poland | patriotic national flag badge of Poland, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591PT | enamel nationality flag badge / plaque Portugal | patriotic national flag badge of Portugal, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591RU | enamel nationality flag badge / plaque Russia | patriotic national flag badge of Russia, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591S | enamel nationality flag badge / plaque Scotland | patriotic national flag badge of Scotland, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591ES | enamel nationality flag badge / plaque Spain | patriotic national flag badge of Spain, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591SE | enamel nationality flag badge / plaque Sweden | patriotic national flag badge of Sweden, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591CH | enamel nationality flag badge / plaque Switzerland | patriotic national flag badge of Switzerland, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591 | enamel nationality flag badge / plaque United Kingdom | patriotic national flag badge of United Kingdom GB, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591USA | enamel nationality flag badge / plaque United States of America | patriotic national flag badge of United States of America, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 591W | enamel nationality flag badge / plaque Wales | patriotic national flag badge of Wales, hard jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts for mounting on to bonnet or grill |
£7.00 for 1 each |
| 378ME | Mann Egerton & Co Ltd supplier plate | Mann Egerton & Co Ltd supplier plate - stamped copper. marked Mann, Egerton & Co Ltd, Motor & Electrical Engineers, Norwich, Bury St Edmunds, & Euston Rd London measures 52mm x 25mm a nice finishing detail - limited availability |
£11.00 for 1 each |
| 321 | motor circuit badge | traditional badge bar mounted badge depicting motor race circuits. all chrome finish with different colour backgrounds. the circuit shape is picked out in a different colour. we offer circuits: Brooklands, Brands Hatch, Donington Park, Silverstone, Oulton Park, Mallory Park, Snetterton, Thruxton and Goodwood |
£17.35 for 1 each |
| CA1019C | Motor Union badge | reproduction of the Motor Union badge. (words Motor Union picked out in colour). no mounting holes drilled. |
£52.95 for 1 each |
| 591-clear | nationality flag badge / plaque | patriotic national flag enamel badges, multi coloured, chrome backing approx 56mm x 35mm, for mounting on to bonnet or grill. stocked as under:
price reduced to clear |
£5.30 for 1 each |
| 378PA | Paris- Automobile supplier plate | Paris- Automobile supplier plate - engraved brass. marked Paris- Automobile 48 & 50, Rue d'Anjou, Paris measures 78mm x 16mm a nice finishing detail - limited availability |
£11.00 for 1 each |
| 306 | RAC motor badge | reproduction RAC members badge with blue backing panel. chrome finish. |
£23.25 for 1 each |
| 666 | Union Jack vinyl badge | self-adhesive vinyl badges - approx 65mm x 40mm. sold in pairs (2 pieces) |
£3.00 for 1 pair |
Category: Top / accessories / boyce meter / | |||
| 466 | Boyce motometer | small, gold colour face motormeter (temperature meter) to fit in to radiator cap, 60mm approx diameter. requires 11mm hole in cap for fitting. the temperature sender bulb is approx 38mm long. it is not essential for this to be immersed in the water, as it will still function via the warmed air above the radiator coolant. |
£36.00 for 1 each |
| 892 | Boyce motometer | large size motormeter (temperature meter) with wreathed rim, approx 85mm diameter. requires 16mm hole in cap for fitting. the temperature sender bulb is approx 43mm long. it is not essential for this to be immersed in the water, as it will still function via the warmed air above the radiator coolant. |
£63.00 for 1 each |
| 239D | calormeter wings - flat SOLD OUT | period flat pattern wings (approx 173mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. SOLD OUT- NO STOCK AVAILABLE |
£32.00 for 1 each |
| 239E | calormeter wings - large raised wings SOLD OUT | period large raised pattern wings (approx 172mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. SOLD OUT - NO STOCK AVAILABLE |
£45.00 for 1 each |
| 239B | calormeter wings - raised curved wings | period wings (approx 137mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. |
£38.00 for 1 each |
| 239A | calormeter wings - small | period small wings - President - (approx 90mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. |
£24.75 for 1 each |
| 239C | calormeter wings - small raised wing | period wings - Speed - (approx 128mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. |
£29.00 for 1 each |
| 239F | calormeter wings- medium raised wing SOLD OUT | period medium raised pattern wings (approx 146mm wide) to fit under the Boyce meter to enhance the radiator cap. offered in nickel or chrome plate finish. SOLD OUT - NO STOCK AVAILABLE |
£32.00 for 1 each |
| 1000 | radiator temperature meter | temperature thermometer to fit through radiator cap. choice of chrome or nickel finish (on brass body). head 77mm diameter with thermometer visible through clear bevel glass. silver colour face to other side. stem requires 14mm hole for mounting. the temperature bulb length is 83mm. |
£46.20 for 1 each |
| CA993 | wings for Boyce motometer | period wings (approx 200mm wide) to fit under the Boyce meter to enhance the radiator cap. |
£21.00 for 1 each |
Category: Top / accessories / exhaust fish tail / | |||
| CA1049 | Brooklands type exhaust silencer/fishtail | cast aluminum exhaust fishtail/silencer to Brooklands pattern, often used on sports car or motorcycle. standard hole for pipe 42mm diameter but it can be sleeved down, or bored out to fit 50mm diameter pipe. overall size 445mm x 185mm (main body measures 140mm wide). fishtail measures approx 155mm. cast integral boss for mounting which is undrilled. supplied unpolished only. weight approx 2.20kg. |
£94.00 for 1 |
| CA1050 | exhaust fishtail | cast aluminum exhaust fishtail, 180mm wide x 215mm long. supplied in unpolished aluminum only. requires drill/tap for securing bolt. to fit on to pipe approx 41mm outside. can be sleeved down as required or can be enlarged to a maximum approx 48mm bore. weight approx .785kg |
£36.35 for 1 each |
| CA1077 | exhaust fishtail - large | cast aluminum exhaust fishtail, 240mm wide x 265mm long. supplied in unpolished aluminum only. requires drill/tap for securing bolt. (may require additional mounting/steady bracket for support) to fit on to pipe approx 58mm outside. can be sleeved down as required or can be enlarged to a maximum approx 65mm bore. weight approx 1.75kg |
£54.00 for 1 each |
Category: Top / accessories / filler cap / cap / | |||
| 111 | filler cap | Monza type cap - internal thread 2 1/2" (63mm) x 16 TPI. overall approx 76mm x 100mm overall. release button is opposite the hinge under the lid. |
£0.00 for 1 each |
| 113 | filler cap | Aston type cap - internal thread 2 1/2" (63mm) x 16 TPI. approx 76mm x 115mm overall. release lever stands up slightly at side. |
£0.00 for 1 each |
| 114 | filler cap | Aston type cap -internal thread 2 3/4" (70mm) x 16 TPI.approx 89mm x 121mm overall. release lever stands up slightly at side. |
£0.00 for 1 each |
| 115 | filler cap | Aston type 2 - polished light alloy finish - internal thread 3 1/2" BSP (100mm) 3.93" x 11 TPI , approx 122mm x 162mm overall. release lever stands up slightly at side. |
£119.96 for 1 each |
| 115A | filler cap - with roller catch | Aston type 2 - polished light alloy finish - internal thread 3 1/2" BSP (100mm) 3.93" x 11 TPI , approx 122mm x 162mm overall. release lever stands up slightly at side roller catch. original pattern fuel filler cap as used on Jaguar C & D type etc. |
£158.58 for 1 each |
| 110 | filler cap 2 inch | Monza type cap - internal thread 2" (51mm) x 18 TPI. overall size approx 60mm wide x 82mm long x 28mm tall. release button is opposite the hinge under the lid. |
£0.00 for 1 each |
| 968 | lever top filler cap - Bonara | reproduction of Bonara lever top filler cap, period fitting to Singer and MG of the 1930's, supplied in chrome plate finish over bronze (fully machined and assembled). internal thread to neck 2.3/8" (approx 60mm) x 20tpi. overall size 75mm x 110mm including lever. |
£119.00 for 1 each |
| 968B | lever top filler cap Bonara | reproduction of larger Bonara lever top filler cap, period fitting to Riley etc of the 1930's, supplied in chrome plate finish over bronze (fully machined and assembled). internal thread to neck 2.3/4" (approx 70mm) x 16tpi. overall size 85mm x 137mm including lever. fits to our standard 2.3/4" filler necks (119, 119A, 166 or 166A listed) |
£163.00 for 1 per tin |
| LIK1 | locking insert for flange funnel | locking filler cap insert for fitting into flange funnels. note this will NOT fit the 2" cap parts. |
£21.05 for 1 each |
| CA844 | screw on cap | an attractive aluminium screw on cap suitable for either petrol tank or radiator. new old stock. thread approx 58mm by approx 10 TPI. used on competition 500's |
£10.00 for 1 each |
| CA1431 | Wilmot Breeden locking fuel cap | locking type Wilmot Breeden chrome plated fuel filler cap. 2 point bayonet fitting cap supplied complete with two keys. preferred filler neck size inside minimum 37mm, locating tangs max 46mm dimension. fits MGB, Spitfire etc. cap measures 79mm overall. |
£14.30 for 1 each |
Category: Top / accessories / filler cap / neck / | |||
| 117 | filler cap adapter neck | flanged adapter neck - thread 2" (51mm) x 18 TPI, overall diameter 3" (75mm) chrome on brass. |
£16.00 for 1 each |
| 118 | filler cap adapter neck | flanged adapter neck - thread 2 1/2“ (63mm) x 16 TPI, overall diameter 4" (110mm) chrome on brass. |
£20.80 for 1 each |
| 119 | filler cap adapter neck | flanged adapter neck - thread 2 3/4" (70mm) x 16 TPI, overall diameter 4" (115mm) chrome on brass. |
£23.90 for 1 each |
| 120 | filler cap adapter neck | flanged adapter neck - thread 3 1/2" BSP, overall diameter 125mm, alloy. |
£29.88 for 1 each |
| 164 | filler cap adapter neck | plain adapter neck in brass - external thread 2" (51mm) x 18 TPI, fits over 45mm diameter pipe |
£9.80 for 1 each |
| 165 | filler cap adapter neck | plain adapter neck in brass - external thread 2 1/2" (63mm) x 16 TPI. fits over 57mm pipe |
£12.60 for 1 each |
| 166 | filler cap adapter neck | plain adapter neck in brass - external thread 2 3/4" (70mm) x 16 TPI. fits over 63mm pipe. |
£14.25 for 1 each |
| 164A | filler cap adapter neck - aluminium | plain adapter neck in aluminium - external thread 2" (51mm) x 18 TPI, for welding or 51mm ID hose. |
£6.00 for 1 each |
| 165A | filler cap adapter neck - aluminium | plain adapter neck in aluminium - external thread 2.1/2" (63mm) x 16 TPI, for welding or 63mm ID hose. |
£7.00 for 1 each |
| 166A | filler cap adapter neck - aluminium | plain adapter neck in aluminium - external thread 2.3/4" (70mm) x 16 TPI, for welding or 70mm ID hose. |
£8.00 for 1 each |
| 120A | flanged filler neck with spigot | flanged aluminium neck with internal spigot for 2" (51mm) pipe. thread 3 1/2" BSP, overall diameter 126mm. this flange will accept the LIK1 locking filler cap |
£45.95 for 1 each |
| 118A | flanged filler neck with spigot | flanged aluminium neck with internal spigot for 2" (51mm) or 2.1/4" (57mm) pipe. thread 2.5" x 16TPI, overall diameter 94mm. this flange will accept the LIK1 locking filler cap |
£37.22 for 1 each |
| 117A | flanged filler neck with spigot | flanged aluminium neck with internal spigot for 2" (51mm) pipe. thread 2" x 18TPI, overall diameter 82mm. this flange will NOT accept the LIK1 locking filler cap |
£25.90 for 1 each |
| 119A | flanged filler neck with spigot | flanged aluminium neck with internal spigot for 2" (51mm) or 2.1/4" (57mm) pipe. thread 2.75" x 16TPI, overall diameter 94mm. this flange will accept the LIK1 locking filler cap |
£39.82 for 1 each |
Category: Top / accessories / gauges, instruments and pumps / | |||
| CA684A | air pressure gauge - calibrated 0-50lb/sq in | one of the range of quality matching dashboard instruments which we offer. air pressure gauge marked 0 to 50lb/sq in (pounds per square inch). polished brass rim (73mm diameter overall) with white figures on black background dial. the rim can easily be removed should plating be required. hole in dashboard 54mm. 1/8"BSP fitting on back. |
£38.30 for 1 each |
| CA684 | air pressure gauge - calibrated 0-5lb/sq in | one of the range of quality matching dashboard instruments which we offer. air pressure gauge marked 0 to 5lb/sq in (pounds per square inch). polished brass rim (73mm diameter overall). the rim can easily be removed should plating be required. hole in dashboard 54mm. 1/8"BSP fitting on back. |
£62.50 for 1 each |
| CA1064 | air pressure pump | brass pressure pump for fule tank pressurisation etc. the tubular body has a flange (undrilled) for fixing unit on vehicle, T grip handle. supplied with solder type fittings for 1/4" or 5/16" (specify) copper pipe. the unit has an inbuilt non return valve to prevent back suction. body approx 260mm long x 40mm diameter. |
£125.40 for 1 each |
| CA1313 | choke cable assembly | choke cable assembly with black knob and stiff bowden cable. approx 920mm length (inner wire 1040mm length) |
£4.80 for 1 each |
| CA1381 | control cable - bowden wire | control cable with stiff bowden wire centre wire, 1500mm long which can be shortened as required. requires 9.4mm panel hole for fixing. stiff inner wire cable. the plastic knob is of plain traditional appearance and acceptable to earlier applications, however we also feel that this unit makes a good start for earlier applications if the existing pull knob is turned down or replaced with another. |
£5.50 for 1 each |
| CA429 | fuel slide gauge | new fuel tank slde type sender gauge. this is the pattern offered by Rotherhams of Coventry for many years fitting into the top of the fuel tank. a deeper float is fitted which works in the modern fuels! the float travels on a spiral directly connected to the needle which turns through 180 degree, marked empty 1/4 1/2 3/4 full, silver dial with black figures. all brass construction, which are made to order. please indicate the length required from the face of the tank flange to the tank depth (minimum length about 20cm - maximum length 80cm). we can offer two flange variations, hexagonal flange - measures 60mm across flats hexagonal, is threaded under 2" x 16tpi. OR circular flange - measures 63mm diameter, with drilled screw fixing holes. |
£201.20 for 1 each |
| 421 | Hobson Tele gauge type liquid | small phial of special liquid for Hobson telegauge fuel gauge |
£9.00 for 1 each |
| CA1380 | locking choke cable | locking choke cable 1500mm long which can be shortened as required. requires 9.1mm panel hole for fixing. rigid inner bowden wire cable. the plastic knob is of modern appearance as used on many 1960's vehicles, however we also feel that this unit makes a good start for earlier applications if the existing pull knob is turned down or replaced with another. |
£6.10 for 1 each |
| CA1440 | oil pressure gauge | one of the range of quality dashboard instruments which we offer. oil pressure gauge marked 0 to 100lb/sq in (pounds per square inch). chrome rim (57mm diameter overall) with white figures on black background dial. hole in dashboard 52mm. 1/8"BSP solder fitting nut and nipple on back. side illumination slots. supplied with retaining saddle. |
£60.10 for 1 each |
| CA718 | oil pressure gauge - calibrated 0-25lb/sq in | one of the range of quality matching dashboard instruments which we offer. oil pressure gauge marked 0 to 25lb/sq in (pounds per square inch). polished brass rim (73mm diameter overall). the rim can easily be removed should plating be required. hole in dashboard 54mm. 1/8"BSP solder fitting nut and nipple on back. |
£62.50 for 1 each |
| CA717 | oil pressure gauge - calibrated 0-60lb/sq in. | one of the range of quality matching dashboard instruments which we offer. oil pressure gauge marked 0 to 60lb/sq in (pounds per square inch). polished brass rim (73mm diameter overall). the rim can easily be removed should plating be required. hole in dashboard 54mm. 1/8"BSP solder fitting nut and nipple on back. |
£62.50 for 1 each |
| CA719 | oil pressure gauge- calibrated 0-100lb/sq in. | one of the range of quality matching dashboard instruments which we offer. oil pressure gauge marked 0 to 100lb/sq in (pounds per square inch). polished brass rim (73mm diameter overall) the rim can easily be removed should plating be required. hole in dashboard 54mm. 1/8"BSP solder fitting nut and nipple on back. |
£62.50 for 1 each |
| CA721 | Smiths water temperature gauge | one of the range of quality dashboard instruments which we offer. water temperature gauge, calibrated 30 to 110 degree centigrade. chrome rim (57mm diameter overall) with white figures on black background dial. hole in dashboard 52mm. capillary 2000mm long. capillary sensor bulb 30mm long, 11mm diameter, with fixing nut-union (3/8" BSP), side illumination slots, supplied with retaining saddle. |
£80.65 for 1 each |
| CA1310 | water temperature and oil pressure gauge | combined duplex gauge for oil pressure and water temperature. a quality new instrument with chrome rim, white digits on black dial, 56.5mm diam, with standard 2" (51mm) body fitting through panel. supplied with retaining bracket etc. the oil pressure calibrated 0 to 100 psi, with 1/8" BSP standard oil pressure pipe connection. the temperature calibrated 30 to 110 degree Celsius, 1800mm long capillary, with sensor bulb 9.85mm x 39mm long (retaining nut is 5/8"UNF thread). |
£96.60 for 1 each |
| CA720 | water temperature gauge | one of the range of quality matching dashboard instruments which we offer. water temperature gauge, polished brass rim (73mm diameter overall) the rim can easily be removed should plating be required. hole in dashboard 54mm. 1850mm long capillary tube. sensor 40mm long, fixed with 3/8" BSP union nut. |
£95.40 for 1 each |
Category: Top / accessories / GB & rear plaque / | |||
| CA645 | 2 wheel brake sign | cast aluminium triangular 2 wheel brake sign, red background with raised aluminium letters. a nice period accessory, this part requires holes drilled for fixing. size 125mm tall x 127mm wide. |
£18.50 for 1 each |
| CA411 | 4 wheel brake sign | cast aluminium triangular 4 wheel brake sign, (to brag about!) red background with raised aluminium letters. a nice period accessory, this part requires holes drilled for fixing. size 125mm tall x 127mm wide. |
£18.50 for 1 each |
| 900F | cast France plate F | oval cast F plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing. |
£15.60 for 1 each |
| 900H | cast GB plate marked Humber | oval cast GB plaque with Humber oval mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 133mm. supplied undrilled for any fixing. |
£22.45 for 1 each |
| 900S | cast GB plate marked Sunbeam | oval cast GB plaque with Sunbeam oval mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 151mm. supplied undrilled for any fixing. |
£25.15 for 1 each |
| 900ALV | cast GB plate with Alvis logo | oval cast GB plaque with Alvis logo inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 133mm. supplied undrilled for any fixing. |
£22.45 for 1 each |
| 900A | cast GB plate with Austin wings | oval cast GB plaque with Austin wings mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 148mm x 107mm. supplied undrilled for any fixing. |
£17.50 for 1 each |
| 900B | cast GB plate with Bentley wings | oval cast GB plaque with Bentley B wings mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 155mm. supplied undrilled for any fixing. |
£25.15 for 1 each |
| 900R | cast GB plate with marked Riley | oval cast GB plaque with Riley diamond mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 133mm. supplied undrilled for any fixing. |
£22.45 for 1 each |
| 900MG | cast GB plate with MG logo | oval cast GB plaque with MG octagon badge inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 133mm. supplied undrilled for any fixing. |
£22.45 for 1 each |
| 900RR | cast GB plate with RR | oval cast GB plaque with RR (Rolls Royce) inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 133mm. supplied undrilled for any fixing. |
£18.75 for 1 each |
| 900D | cast Germany plate D | oval cast D plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing. |
£15.60 for 1 each |
| 900IRL | cast Ireland plate IRL | oval cast IRL plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing. |
£15.60 for 1 each |
| 900NL | cast Netherland plate NL | oval cast NL plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing. |
£15.60 for 1 each |
| 900LAG | cast oval GB plate with Lagonda wings | oval cast GB plaque with Lagonda wings, with raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 155mm. supplied undrilled for any fixing. |
£25.15 for 1 each |
| 900MOR | cast oval GB plate with Morgan wings | oval cast GB plaque with Morgan wings, with raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 155mm. supplied undrilled for any fixing. |
£25.15 for 1 each |
| 698 | country origin letters | heavy gauge chromium plated brass letters approx 88mm tall x 62mm wide, as available in early post-war years. threaded studs to rear for fixing through panel. we offer these to suit a wide variety of country requirements - specify letters required GB (Great Britain), B (Belgium) , NL (Netherlands), DK (Denmark), CH (Switzerland), F (France), E (Spain) etc. price EACH letter |
£12.10 for 1 each |
| CA1159 | GB letters | chrome on brass GB letters 84mm high, each letter attached by 2 screws and nuts from behind ( hole centres 70mm). please note it is necessary to drill body/bracket to fix this part. |
£9.00 for 1 set |
| 474 | GB plaque | medium plate, black letters engraved into polished aluminium sheet, size approx 190mm x 110mm. requires holes drilling for fixing bolts. |
£17.00 for 1 each |
| 582 | GB plaque | large cast aluminium plate with recessed letters, size 290mm x 170mm, copied from an original pattern. required holes drilling for fixing bolts. |
£22.50 for 1 each |
| 705 | GB plaque | small plate, letters engraved into polished aluminium sheet, approx 102mm x 63mm. requires holes drilling for fixing bolts. |
£14.00 for 1 each |
| CA791 | GB plate - pressed | GB plate in pressed alloy, black raised digits on white background. 178mm wide X 127mm high, two hole for mounting. traditional sign. |
£10.60 for 1 each |
| CA410 | GB plates - cast aluminium | cast aluminium GB plate. supplied with polished finish and recessed digits painted black. 178mm x 115mm. requires drilling for fixing. |
£16.00 for 1 each |
| CA792 | GB sticker - self adhesive | oval self adhesive GB sticker, black letter on white background.175mm x 117mm approx. |
£3.50 for 1 each |
| 900 | oval GB plaque | oval cast GB plaque with raised polished letters and rim, black background, nice vintage pattern that we have cast from an original. size 139mm x 92mm. fixed by drilling and blind tap thickened rib on rear. |
£18.00 for 1 each |
| CA1376 | self adhesive chrome GB letters | self adhesive stick-on chrome GB letters 84mm tall. |
£9.90 for 1 set |
Category: Top / accessories / helmet, gloves & goggles / | |||
| CA1102DB | Biggles pattern sheepskin hat | sheepskin Biggles pattern motoring helmet. brown leather with soft natural lining, only offered in one size fits all. made from segmented pattern, with neck protection, ear flaps etc. note the front does not pull down to create a peak. ear flaps can be clipped together over the top with the retaining strap, offering the user the opportunity to resemble a spaniel or to use the under chin strap to retain the ear covers down. made in UK |
£24.00 for 1 each |
| CA1102b | Brooklands motoring cap | a well made tweed peak hat, lined inside, with neck and ear flaps. good quality wool cloth in a various colour tweed cloths. these are made to order (long delivery possible). please see 'fitting instructions' for the head size calculations! |
£37.50 for 1 each |
| CA1444 | classic crochet backed gloves | classic cotton crochet back with deerskin palm, totally traditional style. offered in small,medium or large size. price per pair. |
£31.50 for 1 pair |
| CA1413 | classic racing helmet | this helmet retains all the features of the original 1950's low dome helmet. manufactured now with a fibreglass shell, leather interior, side flaps and neck curtain. offered in a choice of colours, in sizes small (54 to 58cm), medium (58 to 61cm) or large (61 to 64cm). please note that these helmets are made to order only, please allow 4 week possibly for despatch. PLEASE NOTE THAT THIS HELMET DOES NOT CONFORM TO ANY CURRENT HELMET SAFETY STANDARDS |
£152.75 for 1 each |
| CA1443 | classic style leather driving glove | all black leather glove with stud fastener, knuckle holes on back and perforated fingers. offerd in small, medium and large size. price per pair. |
£24.70 for 1 pair |
| CA1119 | Deer stalker hat | well made `deer stalker' hat, fully lined, these caps are made to order (possible long delivery), please see 'fitting instructions' for the head size calculations! |
£39.50 for 1 each |
| CA1194a | driving gauntlets - leather | these quality gauntlets are manufactured specially for us to a traditional pattern. they are made of quality black leather with a fleece type lining and are very warm. available in small size only |
£28.00 for 1 pair |
| CA1194 | driving gauntlets - sheepskin | these beautiful gloves are manufactured specially for 'The Complete Automobilist' in England to an early motoring design. they are made of double faced 100% sheepskin and are very warm indeed. available in small, medium, large and extra large sizes and choice of colour black leather, brown suede or brown leather |
£36.00 for 1 pair |
| CA1102c | Gamecock motoring cap | a well made traditional peak cap hat, lined inside, good quality wool cloth in a variety of colours. these caps should fit well on the head and will pull well down for good fit. generally these are made to order (long delivery possible). please see 'fitting instructions' for the head size calculations! the stock selection picture gives an indication of some colour choices. |
£37.50 for 1 each |
| CA1102a | Kestrel motoring cap | well made full shape eight piece wool tweed cap of a style from the 1920's. fully lined hat that will cover the head well. these caps are made to order (possible long delivery), please see 'fitting instructions' for the head size calculations! the stock selection picture gives an indication of some colour choices. |
£33.50 for 1 each |
| 754L | leather Mk9 motoring goggle | motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 9 brown leather, traditional style. |
£43.20 for 1 each |
| 753 | leather motoring helmet | a really good quality soft leather helmet, enabling open air motoring in style and comfort. made from best quality hide, with a cloth lining. detail includes adjustable chin strap, ear flaps, goggle retaining strap, deep neck extension, thumb strap for easy removal. the quality of these leather helmets would be very difficult to fault. we stock brown only in small (approx 520mm round), medium (approx 540mm round), large (approx 565mm round) and extra large (approx 600mm round). specify size when ordering. each. should a helmet not fit the head for which it was ordered, return it quickly to us and we will replace with a size up or down as requested. |
£44.00 for 1 each |
| CA1080A | leather motoring helmet (with flap) | a really good quality soft leather helmet with lower neck protection flap, enabling open air motoring in style and comfort. made from best quality hide, with a chamois leather lining. detail includes adjustable chin strap, goggle retaining strap, deep neck extension, thumb strap for easy removal. the quality of these leather helmets would be very difficult to fault or better. available in black, brown, white or red leather, in small (approx 520mm round), medium (approx 540mm round), large (approx 565mm round) and extra large (approx 600mm round). specify size when ordering. each. should a helmet not fit the head for which it was ordered, return it quickly to us and we will replace with a size up or down as requested. |
£43.50 for 1 each |
| CA1080 | leather motoring helmet leather (without flap) | a really good quality soft leather helmet without lower neck protection flap, enabling open air motoring in style and comfort. made from best quality hide, with a chamois leather lining. detail includes adjustable chin strap, goggle retaining strap, deep neck extension, thumb strap for easy removal. the quality of these leather helmets would be very difficult to fault or better. available in black, brown, white or red leather, in small (approx 520mm round), medium (approx 540mm round), large (approx 565mm round) and extra large (approx 600mm round). specify size when ordering. each. should a helmet not fit the head for which it was ordered, return it quickly to us and we will replace with a size up or down as requested. |
£41.50 for 1 each |
| CA1154 | LUXOR Goggles 'Nuvolari' style | period style Aviator goggles of a type as worn by Nuvolari, similar to the original `Luxor' type. oval rims in nickel finish with rubber backing. supplied complete with spare colour tinted lenses, very high quality. |
£74.95 for 1 pair |
| CA1154A | LUXOR Goggles 'Nuvolari' style (prescription) | superb period style Aviator goggles, but with integral frames to allow the fitting of prescription lenses, of a type as worn by Nuvolari, similar to the original `Luxor' type. oval rims in gunmetal (satin black colour) or nickel finish with rubber backing. supplied complete with spare colour tinted lenses, very high quality. |
£125.50 for 1 pair |
| CA1157 | MK10 motoring goggles - curved lens | a most recent and improved style motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, curved type lens, high impact resisting lenses - black only. choice of pvc OR leather at £43.00 |
£31.00 for 1 pair |
| 754 | motoring goggle Mk 9 | motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 9. brown OR black PVC offered, traditional style. |
£29.00 for 1 each |
| CA1155A | motoring goggle Mk4 black | motoring goggles specially designed to ensure a snug and comfortable fit. slide adjuster over nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 4 black leather face, traditional style. |
£36.50 for 1 pair |
| CA1155 | motoring goggle Mk8 black | traditional style motoring goggles specially designed to ensure a snug and comfortable fit. slide bar adjuster over nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 8. black PVC. |
£27.40 for 1 pair |
| CA1155C | motoring goggles coloured Mk49 | coloured motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 49 leather faced, traditional style. we offer in colours of black or white. |
£49.80 for 1 pair |
| CA1155E | motoring goggles Mk49 brass frame | brass rim motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 49 brown leather, traditional style. |
£49.80 for 1 |
| CA1155B | motoring goggles Mk49 tan | veteran style motoring goggles specially designed to ensure a snug and comfortable fit. screw thread adjustable nose-bridge, padded surround, angled lens, high impact resisting lenses - Mark 49 tan leather, traditional style. |
£43.00 for 1 pair |
| CA1404 | Nannini Goggles | mototing or motorcycle goggles which has REMOVABLE integral frames inside to accept a prescription lens. comes complete with a template for your optician to shape the lens, and a soft cleaning cloth. very comfortable, made of leather with chrome frame work and CE approved Anti-Fog lenses. offered in black or brown. |
£62.50 for 1 each |
| CA1411 | Retro goggles | motor or motorcylcle goggles superbly made in soft goat leather. chrome rim curved lenses. these goggles are designed to fit over spectacles. supplied with a neat carry /storage case. offered only in black. |
£82.35 for 1 pair |
| CA1102d | Sprite motoring hat | the ultimate headgear for extreme motoring conditions, beautifully hand-made from 100% sheepskin with protection flaps for the neck and ears. only offered in brown, stocked in small, medium and large sizes. these hats offer superb protection, although the leather is coated, it is not waterproof. made in UK |
£36.00 for 1 each |
| CA1083A | white linen motoring helmet (with neck flap) | beautifully made in best quality white linen, offered in small, medium, large and extra large sizes, with lower neck protection flap, exclusive to ourselves. |
£24.50 for 1 each |
| CA1083 | white linen motoring helmet (without neck flap | beautifully made in best quality white linen motoring helmet, offered in small, medium, large and extra large sizes, without lower neck protection flap, exclusive to ourselves |
£23.50 for 1 each |
Category: Top / accessories / helmet, gloves & goggles / spares / | |||
| 754S | goggle strap | replacement elasticated brown OR black headband for most goggles |
£6.00 for 1 each |
Category: Top / accessories / horns and horn buttons / | |||
| CA1350 | boa constrictor (serpent head) horn | large snake head (serpent head) horn/trumpet. overall length of this reproduction item is approx 2100mm. the serpent head is pressed (not a casting), has glass eyes and fork tongue, and the taper flexible tube ends with the rubber bulb supplied. the mounting brackets at either end allow fixing. original examples are extremely rare, and this item offers a well made reproduction item. we offer this is choice of polished brass or nickel plate finish at £582.00 we can offer replacement flexible brass tube to repair original horns if required - please contact us. |
£532.00 for 1 each |
| CA1387 | Bull horn | a modern variation of the traditional 'bull horn', making plenty of noise. the robust electric 12 volt horn is operated by a control lever in the cockpit. this is quite a large unit measuring some 200mm tall x 135mm wide x 185mm deep including the substantial mounting bracket. |
£36.00 for 1 each |
| CA-323 | Button: Bosch horn | Two terminals for wood dash. This button is very similar to the vintage model but has a clip-on cover in place of the early threaded variety. 1 3/8'' (35mm) diameter. |
£28.75 for 1 each |
| CA795 | horn button - Klaxon | horn push buttonengraved Klaxon, flange for mounting on to dash, button head approx 38mm dia. mounting flange 53mm x 35mm with two screw hole. |
£21.25 for 1 each |
| 923 | horn reed | brass horn reed, threaded end, approx 13.5mm diameter x 65mm long. |
£13.50 for 1 each |
| CA324A | klaxon horn button | surface mounted horn press button engraved Klaxon. stainless steel case and rim. black button engraved. mounting hole centres 53mm, body approx 41mm diameter. |
£25.00 for 1 each |
| CA883 | large electric horn | large and noisy 12 volt electric horn , approx 150mm diameter x 90mm deep (front to back). chrome grill, mounting arm supplied. |
£22.90 for 1 each |
| CA1330 | motor horn - bugle | a fine reproduction of the Lucas double twist motor bugle horn. approx 500mm long overall, supplied with rubber bulb, mounting bracket and gauze over front grill opening. very similar to that fitted in 1920's period. fitted with flange. we offer this item in polished brass or nickel plated. |
£55.00 for 1 each |
| CA324 | push horn button | surface mounted, metal cased push button. suitable for horn press button etc. mounting hole centres 53mm, stainless steel rim approx 41mm diam, black button. |
£10.50 for 1 each |
| CA884 | small electric horn 12 volt | small 12 volt electric horn with chrome grill. approx 100mm diameter a 55mm deep. single hole fixing bracket |
£10.10 for 1 each |
| CA884A | small electric horn 6 volt | small 6 volt electric horn with chrome grill. approx 100mm diameter a 55mm deep. single hole fixing bracket |
£10.10 for 1 each |
| CA1350-TUBE | taper brass flexible horn tube | good quality taper brass flexible horn tube - for reapir of boa horns. 1500mm length, 59mm large end, 16.5mm small end outside diameters. wall thickness aprox 2.5mm. |
£200.00 for 1 each |
Category: Top / accessories / leather strap / | |||
| 427-2 | leather bonnet strap - 2 part | leather bonnet strap, we make to order to specific measurements using quality brown or black leather, widths available 31mm or 38mm or 51mm. this pattern made as two part strap, buckle on one strap, pointed end on other, footman staples at ends, with or without pad under buckle. please fax a drawing to us for costing advising dimensions shown on the image- fax number 44 (0) 1692651451, (please note dimension C is overall of strap when in position and joined together and will be less than total measurements of pieces added together) normally we provide plated fittings, do not put any holes in plain strapping, one fixed keeper and one sliding keeper near buckle. please note that the price shown in the cost box is only a 'from' cost. we will advise actual price of the item listed before we actually process the order would customers note that we are restricted in length of leather straps by the size of the cow hide. the maximum length of any piece of leather is 1350mm please. any longer and it is necessary to make a stitched join. |
£30.00 for 1 each |
| 427-3 | leather bonnet strap, side buckle | leather bonnet strap, which we make to order to specific measurements using quality brown or black leather, widths available 31mm or 38mm or 51mm. this pattern made as three part strap, buckles on the side straps, pointed end plain strap over the bonnet top, footman staples at ends, with or without pad under buckle. please fax a drawing to us for costing advising dimensions shown on the image - fax number 44 (0) 1692651451, (please note dimension C is overall of strap when in position and joined together, and will be less than total measurements of pieces added together) normally we provide plated fittings, do not put any holes in plain strapping, one fixed keeper and one sliding keeper near buckle. please note that the price shown in the cost box is only a 'from' cost. we will advise actual price of the item listed before we actually process the order would customers note that we are restricted in length of leather straps by the size of the cow hide. the maximum length of any piece of leather is 1350mm please. any longer and it is necessary to make a stitched join. |
£30.00 for 1 each |
| 427-4 | leather bonnet strap, top buckles | leather bonnet strap, which we make to order to specific measurements using quality brown or black leather, widths available 31mm or 38mm or 51mm. this pattern made as three part strap, buckles on the top strap, pointed end plain strap to both sides, footman staples at ends, with or without pad under buckle. please fax a drawing to us for costing advising dimensions shown on the image - fax number 44 (0) 1692651451, (please note dimension C is overall of strap when in position and joined together, and will be less than total measurements of pieces added together) normally we provide plated fittings, do not put any holes in plain strapping, one fixed keeper and one sliding keeper near buckle. please note that the price shown in the cost box is only a 'from' cost. we will advise actual price of the item listed before we actually process the order would customers note that we are restricted in length of leather straps by the size of the cow hide. the maximum length of any piece of leather is 1350mm please. any longer and it is necessary to make a stitched join. |
£30.00 for 1 each |
| 427-1 | leather strap - belt type | leather belt type strap for luggage restraint, hood strap etc, which we make to order to specific measurements using quality brown or black leather, widths available 25mm, 31mm, 38mm or 51mm. please fax a drawing to us for costing - fax number 44 (0) 1692651451 normally we provide plated fittings, do not put any holes in plain strapping, one fixed keeper and one sliding keeper near buckle. please note that the price shown in the cost box is only a 'from' cost. we will advise actual price of the item listed before we actually process the order would customers note that we are restricted in length of leather straps by the size of the cow hide. the maximum length of any piece of leather is 1350mm please. any longer and it is necessary to make a stitched join. |
£15.00 for 1 each |
| 427-5 | leather wheel strap - three legged | leather spare wheel or bonnet strap with ring centre, which we make to order to specific measurements using quality brown or black leather, widths available 31mm or 38mm or 51mm. this pattern made as two part strap, buckle on the main strap or on the tie strap, footman staples at ends. please fax a drawing to us for costing advising dimensions shown on the image- fax number 44 (0) 1692651451 normally we provide plated fittings, do not put any holes in plain strapping, one fixed keeper and one sliding keeper near buckle. please note that dimension C should be the joined up length of strap. please note that the price shown in the cost box is only a 'from' cost. we will advise actual price of the item listed before we actually process the order would customers note that we are restricted in length of leather straps by the size of the cow hide. the maximum length of any piece of leather is 1350mm please. any longer and it is necessary to make a stitched join. |
£35.00 for 1 each |
| 364 | start handle strap | starting handle strap pocket - brown or black leather 100mm long pocket to fit a 25mm diameter handle. strap 300mm long for bolting on to the chassis. |
£13.60 for 1 each |
Category: Top / accessories / licence holder / | |||
| CA1250 | chrome licence holder | tax disc holder, chrome plate on brass screw on rim with stainless steel back and bracket, single mounting hole (for 10mm bolt). supplied with rubber seal |
£7.50 for 1 each |
| CA1452 | Cowey licence holder | nicely made reproduction motor tax/ licence holder is available either in polished brass, nickel or chrome finish with side fixing bracket. |
£35.50 for 1 each |
| 992A | licence disc holder - angled mounting bracket | quality made tax disc/licence holder which has heavy knurled rim which unscrews to change the licence disc. we offer this item in either self colour polished brass, nickel or chrome plate finish, approx diameter 83mm. with an angled mounting bracket with two fixing holes. |
£34.20 for 1 each |
| 992 | licence disc holder - flat back | quality made tax disc/licence holder which has heavy knurled rim which unscrews to change the licence disc. we offer this item in either self colour polished brass, nickel or chrome plate finish, approx diameter 83mm. with a flat back it can be screwed on to a flat surface. |
£29.20 for 1 each |
| 992S | licence disc holder - side mounting bracket | quatity made tax disc/licence holder which has heavy knurled rim which unscrews to change the licence disc. we offer this item in either self colour polished brass, nickel or chrome plate finish, approx diameter 83mm. with side fixing flat mounting bracket with two fixing holes. |
£34.20 for 1 each |
| 944 | licence holder | quality licence/tax disc holder, surface mounted approx 100mm diameter. available in self colour polished brass, nickel or chrome plate |
£18.50 for 1 each |
| 976 | screen mount licence holder | fixes to interior of flat windscreen surface, a type offered by amongst others, Nustickon. remanufactured with Raydyot badge in removable stainless steel backplate. approx 81mm overall, with wire retaining clip which allows insertion of new disc leaving the holder still positioned on glass. |
£18.50 for 1 each |
| 977 | screen mount licence holder, barnacle type | fix to interior of windscreen, sealing to glass with adjustable suction pad. stainless steel back, approx 85mm diameter, chrome adjusting knob in centre. good value for a period item. |
£7.62 for 1 each |
Category: Top / accessories / mirror / exterior / | |||
| CA1342 | circular clip on mirror | polished stainless steel clip-on mirror with circular convex glass, 102mm diameter. |
£22.50 for 1 each |
| CA1295 | circular rear view mirror. | circular rear view mirror 140mm dia. a splendid reproduction of a large windscreen - pillar mounted early motoring mirror. fitted with a convex lens the unit can be adjusted for length . suitable for most medium to large sized vehicles. arm 10mm diameter, length approx 250mm. |
£99.50 for 1 each |
| CA1230 | clamp on side mirror | chrome finish (clamp to door frame edge) stainless steel outside mirror. flat glass head 111mm diameter, on arm approx 135mm long. adjustment to mirror head angle is by slackening a screw in the arm. base measues approx 36mm high x 19mm wide on the outside area. will grip on to max 4 to 5mm . note that the actual grub screw base is itself held on the the chrome base casing with another screw. |
£21.00 for 1 each |
| CA1403 | classic type door mount rear view mirror | superb classic chrome mirror that screws to a mounting plate that your attach to your door. typical of the type used in late 1960's & 1970's. ideal for many classic cars such as the Mini, MG etc. head 145mm x 90mm, base approx 85mm x 33mm. flat glass. offered in left or right hand door fitting applications. |
£20.95 for 1 each |
| CA1377 | clip on circular mirror | clamp on circular mirror which will fit to left or right side of vehicle. the head approx 78mm diameter, stainless steel back with flat glass, on curved chrome plated arm (approx 65mm) which clamps to the door edge etc. a useful 'peep' mirror. to adjust for fitting to opposite side of vehicle, the clamp bracket can be turned round. |
£14.85 for 1 each |
| 981 | clip on mirror | gutter mount type clamp on stainless steel mirror. convex glass 104mm x 73mm with stainless steel back and bracket. two screws nip the assembly to the right hand side of motor, to suit the left hand side the stainless steel bracket will require re-bending slightly. |
£13.20 for 1 each |
| 982 | clip on mirror | quarterlight glass type clamp on stainless steel mirror. convex glass 104mm x 73mm with stainless steel back and bracket. two screws nip the assembly to the edge of the opening quarterlight, to suit the left hand side the stainless steel bracket will require re-bending slightly. |
£13.20 for 1 each |
| CA1191 | clip-on mirror (circular) | circular clip on mirror . diameter 90mm. |
£18.70 for 1 each |
| 706 | dash mount rear view mirror | dash mounted mirror with single bolt fixing 110mm x 65mm. chromium finish, 120mm overall height, 'Desmo' pattern. used on several sports cars including MG. |
£27.00 for 1 each |
| 706L | dash mount rear view mirror | single mount flat glass rear view mirror. 160mm x 82mm flat glass with chrome surround and back. overall height 120mm. |
£27.00 for 1 each |
| 997 | Desmo oval rear view mirror | oval type Desmo embossed convex glass mirror suitable for vehicles of the '30's, size 110mm tall x 82mm wide (overall length 153mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. our own manufacture, brass/bronze construction, copied from an original 'Desmo', chromium or nickel finish, also polished brass. although these were originally made for right hand mounting we do offer left hand if specified. |
£51.00 for 1 each |
| 653 | Desmo type 263 oval rear view mirror | oval type Desmo embossed convex glass mirror suitable for vehicles of the '30's, size 110mm x 82mm (overall length 175mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. our own manufacture, brass/bronze construction, copied from an original 'Desmo', chromium or nickel finish, also polished brass. although these were originally made for right hand mounting we do offer left hand if specified. |
£45.00 for 1 each |
| 653arm | extended mirror base arm | we offer an extended length body mount bracket arm with approx 25mm longer reach than standard to enable the Desmo mirror to be positioned slightly further away from mouting base. base 58mm x 15mm, holes 38mm centres, flat back. |
£12.50 for 1 each |
| 233 | exterior oval mirror | oval type exterior mirror with flat glass suitable for vehicles of the '30's, size 128mm x 81mm (overall length 196mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. note detail to mounting edge of rear of mirror. brass/bronze construction, chromium finish only. |
£49.50 for 1 each |
| 806L | large round rear view mirror | round mirror 145mm diameter marked Desmo, supplied with either convex or flat glass. fitted with 1/2" (12mm) mounting clamp as standard. available in chromium or nickel plate, or polished brass |
£38.00 for 1 each |
| 395 | Lucas type 160 mirror | Lucas type 160 exterior rear view mirror 153mm x 82mm, chromium finish, convex glass with 1/2" (12mm) clamp. backing plate held in place with 4 screws into brackets. original equipment for MG etc '30s vehicles. |
£87.00 for 1 each |
| 943 | mirror arm | chrome plated non adjustable cranked mirror arm, base 96mm x 21mm. 7/16" (11mm) rod approx 150mm long. specify left or right. |
£26.00 for 1 each |
| 514arm | mirror mounting arm | adjustable 1/2" (12mm) cranked rod arm, base 59mm x 22mm. approx 190mm long. two 6.5mm approx mounting holes 39mm apart. available in chrome or nickel plated, or polished brass |
£27.00 for 1 each |
| 806arm | mirror mounting arm | adjustable knuckle type mirror arm, base 65mm x 18mm (holes approx 42mm centres). approx 165mm long. available in chrome or nickel plated, or polished brass. |
£24.00 for 1 each |
| 707arm | mirror mounting arm | adjustable 3/8" (10mm) cranked rod arm, base 59mm x 22mm. approx 190mm long. two 6.5mm approx mounting holes 39mm apart. available in chrome or nickel plated, or polished brass |
£25.00 for 1 each |
| CA1262 | oval mirror | oval mirror/jointed arm, fine reproduction of this very popular mirror (size 110mm x 82mm) fitted with a convex glass for ease of overtaking, it fixes to the door pillar. width of hole centres 43mm. overall width 175mm. offered in chrome, nickel or self colour brass finish. please note NOT embossed on back of head. |
£39.50 for 1 each |
| 720 | oval rear view mirror | oval arm mounting mirror marked Desmo, size 110mm x 82mm, fitted with clamp for 3/8" (10mm) arm. available chromium or nickel plated finish, or polished brass. convex glass. |
£33.00 for 1 each |
| CA1113D | polished aluminium racing mirror | polished aluminium racing mirror, 98mm diameter x approx 98mm depth. convex glass lens held in adjustable holder with screw adjustment. single bolt (8mm diameter, 30mm long) mounting on base 57mm x 20mm with rubber gasket. |
£13.50 for 1 each |
| 475 | Rallye outside mirror | new unused original stock part of Rallye classic outside mirror. manufactured by Vitaloni of Italy. this mirror is for the LEFT side of vehicle mounting only (right hand side was not considered at this time) and it will not transpose to mount on other side. chrome plated classic angular shape body with flat glass. size 124mm x 85mm x 93mm deep. flat mounting base 35mm x 67mm with two bolt holes 52mm apart. |
£28.60 for 1 each |
| 514 | rear view mirror | Raydyot or Desmo type 36 rectangular convex glass mirror, 155mm x 80mm, with central rear mounting clamp. available in chromium or nickel plate, or polished brass. screws to outside rim. |
£36.00 for 1 each |
| 651 | rear view mirror | wing mirror (similar to Lucas post war type), 112mm diameter, stainless steel mirror back chromium stem, single mounting bolt. sold in pairs only. convex glass. rubber pad on mounting footprint size 42mm x 32mm. |
£22.25 for 1 pair |
| 782 | rear view mirror | wing mounting racing mirror, chrome plated 100mm diameter. aerodynamically styled, fully adjustable and vibration free. 110mm long, two bolt base 93mm x 27mm (hole centres approx 51mm), offered with choice of flat or convex glass. |
£20.20 for 1 each |
| 782A | rear view mirror | wing mounting racing mirror, polished alloy, 100mm diameter, convex glass. aerodynamically styled, fully adjustable and vibration free. 110mm long, two bolt base 93mm x 27mm (mounting hole centres approx 51mm). |
£18.20 for 1 each |
| 790 | rear view mirror | round lightweight alloy racing mirror. 100mm diameter, 90mm deep, single bolt fixing at base. flat glass. |
£16.30 for 1 each |
| 790C | rear view mirror | round chrome plated racing mirror. 100mm diameter, 90mm deep, single bolt fixing at base. flat glass. |
£19.60 for 1 |
| 856 | rear view mirror | spare wheel mounted rear view mirror, chrome 115mm dia flat glass, complete with leather strap 560mm long. longer leather strap available if required at extra cost. |
£40.50 for 1 each |
| CA1464 | rear view mirror - black | rounded lightweight black finish alloy racing mirror with rim, 100mm dia, single bolt fixing, flat glass. base rivetted and alloy self colour rim held with screws. |
£21.00 for 1 each |
| 905 | rear view mirror - Raydyot pattern | rounded lightweight alloy racing mirror with rim, 100mm dia, single bolt fixing, flat glass. base rivetted and rim held with screws. self colour. |
£21.00 for 1 each |
| 917 | rear view wirror | wheel mount rear view mirror - our own make, secured to wheel with two long leather straps. brass construction, 120mm flat or convex round head. supplied chrome, nickel or polished brass. this mirror has various adjustment points to cover most applications. we do not avise use if wheel discs are on wheel. base size is 194mm x 72mm. |
£142.00 for 1 each |
| 707 | rectangular rear view mirror | rectangular arm mounting mirror marked Desmo, size 118mm x 67mm, fitted with clamp for 3/8" (10mm) arm. available chromium or nickel plated finish, with either either flat glass or convex glass, convex glass price is £37.00 piece. |
£31.00 for 1 each |
| CA1053 | rectangular rear view mirrror (large) - | rectangular rear view mirror suitable for the larger Edwardian car. all brass finish. mirror size 178mm x 127mm. fully adjustable mounting bracket for fixing to windscreen pillar. bevelled glass. the mirror was designed to fit approx 20mm dia +/- 4mm, additional packing may be required while fitting |
£135.00 for 1 each |
| 806 | round rear view mirror | round mirror 120mm diameter marked Desmo, supplied with either convex or flat glass. fitted with 3/8" (10mm) mounting clamp as standard. available in chromium or nickel plate, or polished brass |
£36.00 for 1 each |
| 806S | round rear view mirror | small round mirror marked Desmo, 104mm diameter, flat glass only, fitted with 3/8" (10mm) mounting clamp. available nickel or chrome plate, or polished brass |
£35.00 for 1 each |
| CA757 | round rear view mirror | round rear view mirror suitable for the smaller Edwardian car, flat type arm clamps to windscreen frame, optimum size approx 25mm diameter. diameter of head 128mm (flat glass) |
£31.85 for 1 each |
| CA1012 | Toby circular mirror | heavy veteran or edwardian pattern mirror of a style manufactured by Toby previously. flat mirror glass with heavy rim and backing. head 144mm diameter. substantial arm approx 270mm long with very secure mounting base plate 50mm x 63mm. this item is offered in polished brass or nickel plate finish at additional cost |
£155.00 for 1 each |
| CA1013 | Toby rectangular mirror | heavy veteran or edwardian pattern mirror of a style manufactured by Toby previously. flat mirror glass with bevel edge & heavy rim and backing. head 172mm x 135mm. substantial arm approx 270mm long with very secure mounting base plate 50mm x 63mm. this item is offered in polished brass or nickel plate finish at additional cost |
£265.00 for 1 each |
| CA1378 | wing mirror | round mirror head on arm for mounting on to wing or door. single mounting bolt (requires 8mm panel hole) on shaped base (58mm x 18mm), chrome arm slopes out and toward rear. polished stainless mirror head with convex glass approx 112mm diameter. supplied in pairs only. |
£25.20 for 1 pair |
Category: Top / accessories / mirror / interior / | |||
| CA1318 | dash mirror | interior flat glass mirror on stalk, stainless steel rim and backing, chrome plate mount. head 154mm x 62mm, overall height approx 95mm. base 58mm x 16.5mm, 38mm hole centres. |
£12.50 for 1 each |
| CA1277 | dash mounted mirror - XK120 type | dash mounted chrome mirror (original application Jaguar XK120). flat glass lens 113mm x 39mm which is retained with top and bottom retaining lugs (NO protected edge) to plated back. offered with long or short stem. long stem height 105mm, short stem height 35mm to ball on mirror back. two screw hole (30mm centres) mount base (48mm x 20mm). long stem price £30.80 |
£28.50 for 1 each |
| 891A | Desmo type 248 rear view mirror | vintage pre war Desmo pattern, convex bevel edge glass 100mm x 42mm with backing plate, adjusts fully on mounting, suitable for top or bottom fixing, short fixed length arm. available in chrome or nickel finish. mounting hole centres approx 37mm |
£46.38 for 1 each |
| 891 | Desmo type 300 rear view mirror | vintage pre war Desmo pattern, convex bevel edge glass 100mm x 42mm with backing plate, adjusts fully on mounting, suitable for top or bottom fixing, adjustable height arm to approx 115mm. available in chrome or nickel finish. mounting hole centres approx 37mm |
£49.36 for 1 each |
| 100E-17700-C | interior mirror | as original pattern, smoke grey paint finish, flat glass, for 100E and 103E. plain flat glass with ball clamp fitting to stem. glass size approx 127mm x 56mm. overall height 123mm. base size 59mm x 16mm with two screw holes 40mm centre to centre. |
£20.50 for 1 each |
| B17690 | interior mirror | nice neat flat glass interior mirror with bevel edge 126mm x 65mm, glass held at top and bottom with stainless clamp which tightens with three screws onto the stainless steel mounting arm (80mm tall x 68mm wide) with 50mm hole centres. |
£36.00 for 1 each |
| CA1263 | interior mirror | interior rear view mirror, stainless steel with chrome stem as fitted to MGA etc. flat glass, head approx 130mm x 57mm with stainless steel outer protector edge. mounting stem base 58mm x 14mm with two mount holes 40mm centres. max overall height fitted 93mm. |
£21.90 for 1 each |
| A-17682 | interior mirror - rectangular glass | face mounting larger type interior mirror. flat glass 125mm x 66mm which has a bevel edge. the mounting bracket 92mm wide has bracket which clamps to top and bottom of glass. overall height approx 135mm. choice of black mounting bracket or at stainless steel |
£21.50 for 1 each |
| 995 | interior mirror Lucas type 308 | remanufactured interior rear view mirror as Lucas type 308. convex mirror glass 100mm x 43mm, two screw base mount as shown 40mm hole centres. chrome on brass finish. overall height approx 117mm. |
£18.25 for 1 each |
| CA1356 | interior mirror type 308 | remanufactured interior rear view mirror as Lucas type 308. larger convex mirror glass 140mm x 43mm, two screw base mount as shown 40mm hole centres. chrome on brass finish. overall height approx 117mm |
£16.25 for 1 each |
| 584 | interior rear view mirror | dash mounted Winguard pattern mirror, 2 screw base fitting 25mm x 53mm ,holes 34mm centres, all chrome, metal backed flat glass mirror 148mm x 60mm , 110mm overall height. |
£17.50 for 1 each |
| 766 | interior rear view mirror | dash mounted mirror, as fitted to MGA, 2 screw base fitting hole centres 41mm, chrome stem. chrome metal backed mirror 50mm x 125mm holding flat glass. overall height 90mm |
£12.00 for 1 each |
| 890 | interior rear view mirror | dash mirror on adjustable height stem. two screw base 51mm x 21mm (mounting holes 31mm centres), angled away from screen. metal backed glass 105mm x 45mm, stem height adjusts min 80mm max 150mm high, all chrome finish. |
£31.60 for 1 each |
| CA1324 | interior rear view mirror | interior rear view mirror, polished stainless steel back. convex glass 127mm x 54mm. mounting arm approx 85mm high. (approx 100mm overall height). two mounting holes (36mm centres) in base 50mm x 25mm. arm leans away from screen. |
£27.40 for 1 each |
| CA1325 | interior rear view mirror | interior rear view mirror, polished stainless steel back. convex glass 172mm x 62mm. mounting arm approx 85mm high. (approx 105mm overall height). two mounting holes (36mm centres) in base 50mm x 25mm. arm leans away from screen. |
£28.00 for 1 each |
| A-17681 | interior rear view mirror | interior rear view mirror which clamps to top rail of of opening windscreen, to be held by screw clamp. angle adjustment possible on glass. only offered in black finish. bevel edge mirror glass approx 130mm x 70mm |
£21.50 for 1 each |
| CA1036 | interior rear view mirror - clamp on | interior rear view with bracket for fitting on to top of round windscreen frame. 95mm x 153mm. this mirror does not have a frame round the glass.offered in choice of polished stainless steel finish or polished brass. |
£23.50 for 1 each |
| A-17681-T | mirror for top rail mounting | polished stainless steel bracket assembly which will clamp to top rail of open/tourer cars, to be held on by screw clamp. bevel edge flat mirror glass approx 130mm x 70mm. |
£21.50 for 1 each |
| OV-17682 | oval interior mirror | polished stainless steel bracket assembly which will screw to top rail in vehicle, base approx 93mm wide. flat mirror glass with oval rim and back, approx 145mm x 73mm. |
£33.30 for 1 each |
| OV-17682-ANG | oval interior mirror | polished stainless steel bracket assembly which will screw vertically at 90 degrees to the mirror head, in to the top rail in vehicle, base approx 86mm x 30mm. flat mirror glass with oval rim and back, approx 145mm x 73mm. |
£33.33 for 1 each |
| OV-17681 | oval mirror for top rail mounting | polished stainless steel bracket assembly which will clamp to top rail of open/tourer cars, to be held on by screw clamp. flat mirror glass with oval rim and back, approx 145mm x 73mm. |
£33.30 for 1 each |
| 294 | rod mount interior mirror | polished stainless steel backed interior mirror which clamps to rod of minimum 5mm diameter (not supplied). 153mm x 56mm with flat glass. |
£11.50 for 1 each |
| CA1135 | suction mirror - small | rectangular suction mirror, flat glass, with swivel adjustment. black plastic back and surround 120mm x 56mm. suction pad 53mm diam. |
£4.50 for 1 each |
| CA1135A | suction mirror - large | rectangular suction mirror, flat glass, with swivel adjustment. black plastic back and surround 156mm x 68mm. suction pad 53mm diam. |
£5.60 for 1 each |
| CA1367 | suction mirror - stainless steel | suction mirror for interior use on screen. flat glass, stainless steel backing and edge rim 156mm x 63mm. |
£9.45 for 1 each |
Category: Top / accessories / mirror / spares / | |||
| 12mm.clamp | clamp for 1/2 inch rod | painted steel clamp for 1/2" (12.7mm) rod, for rear of mirror etc. as shown. |
£2.75 for 1 each |
| 395G | mirror glass | replacement convex mirror glass for Lucas type 160 (our 395) mirrors |
£11.00 for 1 each |
| 514G | mirror glass | replacement convex mirror glass for nominal 150mm x 75mm Raydyot or Desmo (our 514) mirrors |
£10.00 for 1 each |
| 653G | mirror glass | replacement convex mirror glass for Desmo oval knuckle mount mirror , convex or flat offered |
£7.50 for 1 each |
| 891G | mirror glass | replacement convex mirror glass for Desmo dash mounted mirrors (our 891 & 891A) |
£12.50 for 1 each |
Category: Top / accessories / miscellaneous / | |||
| CA1408B | cigarette lighter | cigar/cigarette lighter accessory. black engraved push knob. requires 22mm diameter hole in dash panel for fitting. the outside cone nut is shortened to allow fixing to thicker panels. |
£13.90 for 1 each |
| CA1408 | cigarette lighter | cigar/cigarette lighter accessory. requires 22mm diameter hole in dash panel for fitting. the outside cone nut is shortened to allow fixing to thicker panels. |
£23.50 for 1 each |
| CA1408-L | cigarette lighter with illumination | cigar/cigarette lighter accessory. chrome push knob, has illumination ring for night time use. requires 22mm diameter hole in dash panel for fitting. the outside cone nut is shortened to allow fixing to thicker panels. |
£25.70 for 1 each |
| CA1408B-L | cigarette lighter with illumination | cigar/cigarette lighter accessory. black engraved push knob, has illumination ring for night time use. requires 22mm diameter hole in dash panel for fitting. the outside cone nut is shortened to allow fixing to thicker panels. |
£16.10 for 1 each |
| 53601 | Morris 8 van mascot | chromium plated radiator mascot for Morris 8 Series 1 5cwt van 1935-39 |
£16.20 for 1 each |
| CA1366 | roof mounted radio aerial | roof mounted radio aerial supplied with 2 metre of cable. 4.5mm mounting bolt, 530mm long, 890mm extended, spring base. |
£13.50 for 1 each |
| CA1384 | windscreen demister | period remanufactured windscreen demist, which fixes to the inside of the glass with two suction pads, and the electrical element heats the air to rise against the glass. 280mm long x 33mm tall, brown body. integral on/off switch. (length of cable supplied, requires electrical supply). please specify whether 12volt or 6volt required |
£23.50 for 1 each |
Category: Top / accessories / number plates / | |||
| CA794d | cast aluminium flat digits | cast aluminium flat digits 3.5" x 2.5" (89mm x 63mm) with rear studs for fixing to steel or aluminium number plate blanks, original 1920's style. please advise digits (letters and numbers) required. price each digit. |
£3.85 for 1 each |
| CA794 | cast aluminium number backplate oblong | oblong cast aluminium number plate backplate, 530mm x 132mm, with raised half round edge. supplied in self colour only (requires painting). this plate is suitable for signwritten numbers or for fixing the cast digits |
£22.50 for 1 each |
| NP101 | cast aluminium number plate | early style cast aluminium number plate with shaped top for fitting rear lamp. solid cast using 3.1/2" (88mm) tall characters (max 6 per plate). raised edge with rounded corners and digits polished and background black enamel. we supply this plate in one size only (13" x 11.5") 330mm wide x 292mm tall. allow 4-6 weeks for delivery. please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. |
£50.75 for 1 each |
| CA420 | cast aluminium number plate - painted | early style cast aluminium number plate available till the mid 30's. solid cast unit with 3.1/2" (88mm) tall characters (max 6 per plate). raised edge (with square corners) and digits finished in ground finish only, background black enamel. state oblong nominal 21" x 5" (532mmx 127mm) or square 11" x 9" (280mm x 228mm) for ABC 234 format, or 14" x 9" (355mm x 228mm) for AB 2345 format. allow approx 4 weeks for delivery. please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. |
£49.50 for 1 each |
| CA794a | cast aluminium number plate backplate oblong with lamp bracket | oblong cast aluminium number plate backplate with end lamp brackets, 687mm overall x 132mm, with raised half round edge. supplied in self colour only (requires painting). this plate is suitable for signwritten numbers or for fixing the cast digits |
£25.50 for 1 each |
| CA794c | cast aluminium number plate backplate square with lamp bracket | square cast aluminium number plate backplate with offset lamp bracket, 325mm wide x 317mm overall height, with raised half round edge. supplied in self colour only (requires painting). this plate is suitable for signwritten numbers or for fixing the cast digits |
£25.50 for 1 each |
| CA794b | cast aluminium number plate backplate square with lamp bracket | square cast aluminium number plate backplate with centre lamp bracket, 335mm wide x 300mm overall height, with raised half round edge. supplied in self colour only (requires painting). this plate is suitable for signwritten numbers or for fixing the cast digits |
£25.50 for 1 each |
| NPA | steel back plate | steel backplate with half round raised beaded edge. early style for use as backplate or painted on digits, we offer 'oblong' shape, approx size 525mm x 135mm or 'square' shape, approx size 283mm x 255mm. supplied requiring paint. |
£10.00 for 1 each |
| CA1218 | stick on (self adhesive) number plate | self adhesive stick on number plate made to order. we supply either white or silver colour digit on black background, with no edge border. pre 1962 registrations are 6 digit maximum with a digit height of 88mm, standard size backing 532mm long x 126mm high (oblong) or 355mm long x 235mm high (square). 1962 to 1973 registrations are maximum 7 digit with a digit height of 79mm, standard size backing 520mm long x 115mm high (oblong) or 298mm long x 216mm high (square) please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations prior to 1973 which cover late 'pre suffix' numbers and those suffix A through to and including L only, which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£16.70 for 1 each |
| NPBP | vehicle number plate - cast and polished | early style cast aluminium number plate available till the mid 30's. solid cast unit with 3.1/2" (88mm) tall characters (max 6 per plate). raised edge with rounded corners and digits polished and background black enamel. state oblong nominal 21" x 5" (532mmx 127mm) or square 11" x 9" (280mm x 228mm) for ABC 234 format, or 14" x 9" (355mm x 228mm) for AB 2345 format. allow 4 to 6 weeks for delivery. please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. |
£55.75 for 1 each |
| NPBR | vehicle number plate - cast only | early style cast aluminium number plate with rounded or square corners available till the mid 30's. solid cast unit with 3.1/2" (88mm) tall characters (max 6 per plate). supplied in unfinished state which need finishing and painting. state oblong nominal 21" x 5" (532mm x 127mm) or square 11" x 9" (280mm x 228mm) for ABC 234 format, or 14" x 9" (355mm x 228mm) for AB 2345 format. allow 3 to 4 weeks for delivery. please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. |
£37.70 for 1 each |
| NPC | vehicle number plate - pressed | pressed aluminium plate of pre 1963 style, 3.1/2" (88mm) digits (maximum of 6) embossed from rear in the black stove enamel, raised edge plate (beadless available if required). oblong (21"x 5" / 532mm x 126mm) or square (11" or 14"x 9.1/4" / 280mm or 355mm x 235mm). prices include UK delivery, despatch 3 to 4 days only. single - £25.56, pair - £40.88 please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations through to 1963 (pre suffix numbers), which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£25.56 for 1 each |
| NPH | vehicle number plate - pressed | pressed aluminium plate of 1963 to 1973 style. 3.1/8" (79mm) digits (maximum of 7) embossed from rear in the stove enamel, raised edge plate (beadless available if required). oblong (20.5" x 4.5" / 520mm x 114mm) or square (11.75"x 8.5" / 298mm x 216mm). prices include UK delivery, despatch 3 to 4 days only. single - £21.86, pair - £34.96 please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations 1963 (or prior) to 1973 which cover late 'pre suffix' numbers and those suffix A through to and including L only, which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£21.86 for 1 each |
| NPK | vehicle number plate - silver digit | silver plastic digit plate of 1963 to 1973 style, 3.1/8" (79mm) flat top digits (maximum of 7) on black background plate. oblong (20.5"x 4.5" /520mm x 115mm) beaded edge, or square beadless. prices quoted include UK delivery, despatch 3 to 4 days only. single - £27.28, pair - £43.64 please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations 1963 (or prior) to 1973 which cover late 'pre suffix' numbers and those suffix A through to and including L only, which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£27.28 for 1 each |
| NPF | vehicle number plate - white digit | white plastic digit plate of pre 1963 style, 3.1/2" (88mm) flat top digits (maximum of 6) on black background plate. oblong (21"x 5" / 532mm x 126mm) with beaded edge, or square beadless. prices quoted include UK delivery, despatch 3 to 4 days only. single - £31.02, pair - £49.62 please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations through to 1963 (pre suffix numbers), which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£31.02 for 1 each |
| NPJ | vehicle number plate - white digit | white plastic digit plate of 1963 to 1973 style 3.1/8" (79mm) flat top digits (maximum of 7) on black background plate. oblong (20.5" x 4.5" / 520mm x 115mm) beaded edge, or square beadless. prices quoted include UK delivery, despatch 3 to 4 days only. single - £27.28, pair - £43.64 please refer to product 'help' at beginning of number plate section for document requirement at time of order to comply to the Vehicle (Crime) act 2001 supply of number plate regulations. please note that these plates are for registrations 1963 (or prior) to 1973 which cover late 'pre suffix' numbers and those suffix A through to and including L only, which can be supplied with a black background. we do not supply any post 1973 plates which have to be of reflective type. |
£27.28 for 1 each |
Category: Top / accessories / oil can and bracket / | |||
| 456.D | Duckham's NOL engine oil can | quality reproduction of Duckham's NOL oil can standard 2 pint oil can which was carried as the spare top up mounted vertically to the bulkhead of vehicle on a clip bracket. original equipment applicable to MG, Morris, Riley and Wolseley, but will fit other vehicles. made as original in tin plated steel (can and screw lid). the labels reproduced with permission of trade mark owner. the can is offered empty - we do not offer them filled. overall size 222mm tall x 90mm diameter order oil can bracket separately if required please |
£32.00 for 1 each |
| 456.BS | oil can holder bracket | remade oil can holder bracket with circular base plate, for fixing to the bonnet of vehicle to hold the standard original 2 pint oil can vertically to the bulkhead of vehicle. original equipment applicable to MG, Morris, Riley and Wolseley, but will fit other vehicles. spring clip at top to snap round the narrow can neck. gloss paint black finish. this is standard quality, slightly lighter in making than the other item offered. overall size 230mm x 105mm deep order oil can separately if required please |
£12.50 for 1 each |
| 456.BM | oil can holder bracket - circular base | remade quality oil can holder bracket with circular base plate, for fixing to the bonnet of vehicle to hold the standard original 2 pint oil can vertically to the bulkhead of vehicle. original equipment applicable to MG, Morris, Riley and Wolseley, but will fit other vehicles. spring clip at top to snap round the narrow can neck. black matt paint. overall size 230mm x 105mm deep order oil can separately if required please |
£23.00 for 1 each |
| 456.AS | Shell Aeroshell motor oil can | quality reproduction of Shell Aeroshell motor oil can standard 2 pint oil can which was carried as the spare top up mounted vertically to the bulkhead of vehicle on a clip bracket. suitable for fitting to many vehicles. made as original in tin plated steel (can and screw lid). the labels reproduced with permission of trade mark owner. the can is offered empty - we do not offer them filled. overall size 222mm tall x 90mm diameter order oil can bracket separately if required please |
£16.00 for 1 each |
| 456.DS | Shell Double Shell motor oil can | quality reproduction of Shell Double Shell motor oil can standard 2 pint oil can which was carried as the spare top up mounted vertically to the bulkhead of vehicle on a clip bracket. suitable for fitting to many vehicles. made as original in tin plated steel (can and screw lid). the labels reproduced with permission of trade mark owner. the can is offered empty - we do not offer them filled. overall size 222mm tall x 90mm diameter order oil can bracket separately if required please |
£16.00 for 1 each |
Category: Top / accessories / plug holder / | |||
| 714 | 18mm folded washer | folded washer for 18mm spark plug or adaptor 452 |
£0.35 for 1 each |
| CA1106 | spark plug holder | flat top holder designed to take 6 x 18mm plugs or 6 x 14mm plugs or 6 x 10mm plugs. supplied in unpolished aluminium. size 123mm x 67mm. |
£18.30 for 1 each |
| 4p.hold | spark plug holder - 4 way | spare spark plug holder in cast aluminium, supplied tapped but not polished. size approx 127mm x 31mm, available for the 18mm or 14mm plug sizes. it is necessary to drill mounting holes where suitable for your mounting screws or bolts. |
£13.90 for 1 each |
| 6p.hold | spark plug holder - 6 way | turret top spare spark plug holder in cast aluminium, supplied tapped but not polished, size approx 130mm x 67mm. available for the 18mm, 14mm or 10mm plug sizes. |
£18.30 for 1 each |
| 452 | sparking plug adaptor | allows a 14mm plug to be fitted in to a 18mm plug hole, enabling user to take advantage of the wider heat range of 14mm plugs. overall height approx 15.5mm. |
£2.88 for 1 each |
Category: Top / accessories / radiator cap / | |||
| CA1108F | Bentley MKVI type radiator cap | replacement screw on radiator cap for post war Crewe Bentley, external thread. chrome finish on brass. we offer town cap (undrilled) or mascot cap (drilled with hole) |
£94.00 for 1 each |
| CA1108E | Derby Bentley type radiator cap | replacement screw on radiator cap for pre war Derby Bentley, internal thread. chrome finish on brass. we offer town cap (undrilled) or mascot cap (drilled with hole) |
£94.00 for 1 each |
| CA1108A | Rolls Royce type radiator cap 2 inch | replacement screw on radiator cap for Rolls Royce models Silver Ghost, 20HP and Phantom 1 with 2 " internal thread. offered in nickel finish on brass (chrome to order). we offer town cap (undrilled) or mascot cap (drilled with hole) |
£85.00 for 1 each |
| CA1108C | Rolls Royce type radiator cap 2.1/2 inch | replacement screw on radiator cap for Rolls Royce late model Phantom 11 with 2.1/2" internal thread. offered in chrome finish on brass. we offer town cap (undrilled) or mascot cap (drilled with hole) |
£90.00 for 1 each |
| CA1108B | Rolls Royce type radiator cap 2.1/4 inch | replacement screw on radiator cap for Rolls Royce models 20/25, 25/30, Wraith, Silver Wraith, Silver Dawn and early Phantom 11 with 2.1/4 " internal thread. offered in chrome or nickel finish on brass. we offer town cap (undrilled) or mascot cap (drilled with hole) |
£87.00 for 1 each |
| CA1108D | Rolls Royce type radiator cap 2.3/4 inch | replacement screw on radiator cap for Rolls Royce model Phantom 111 with 2.3/4 " internal thread. offered in chrome finish on brass. we offer town cap (undrilled) or mascot cap (drilled with hole) |
£92.00 for 1 each |
Category: Top / accessories / running board / | |||
| CA747 | dickey seat step | dickey seat step plate, an aluminium casting 130mm x 79mm with step tread top and curved under to fit on to the rear mudquard to act as a step when climbing into rear dickey seat. supplied undrilled etc only. |
£16.10 for 1 each |
| 182 | fuel can holder | petrol can carrier of a vintage pattern. strongly made from steel base clamp with cast end. screws to board, and supplied with slot key for bolt. black painted finish. size 218mm deep x 140mm wide. |
£41.50 for 1 each |
| 360 | petrol can holder | quality brass petrol can carrier copied from a 'Walker' original. the two gallon can is strapped over the top on to the running board. when not in use the arms of the carrier fold flat on to the running board. available in polished brass or nickel plate |
£0.00 for 1 each |
| 366 | petrol can holder | petrol can carrier for standard 1 or 2 gallon original cans - cast aluminium 'A' frame type with slot screw clamp, copied from a 'Prima' original. size 175mm x 190mm approx. frame screws on to running board, not polished. |
£23.00 for 1 each |
| CA1127 | petrol can holder | petrol can carrier for standard 1 or 2 gallon original cans - cast aluminium 'A' frame type with knurled grip screw clamp, copied from a 'Grippo' design. size 175mm x 190mm approx. frame screws on to running board, not polished. |
£23.00 for 1 each |
| 183 | petrol can holder frame | aluminium petrol can frame which screws to running board and totally surrounds the base of the can. smooth aluminium frame 294mm x 190mm into which can sits, to be retained with an internal clamp, supplied with slotted key. suitable for old original cans which measure approx 10" x 6" base. |
£58.00 for 1 each |
| 365 | running board mat | coconut hand made mat , approx 375mm x 225mm which is fitted with two brown leather straps long enough to fit a 300mm wide running board. no holes are required to fit this part on to vehicle. |
£54.25 for 1 each |
| CA759A | running board step plate | aluminium running board step plate with aluminium pyramid pattern tread insert. the aluminium frame is not polished. dimensions approx 315mm long, ends 131mm and 104mm (front edge of step tapers) with 48mm high rear upstand which can be cut off if required. offered in pairs only (1 left hand + 1 right hand). |
£41.80 for 1 pair |
| CA759 | running board step plate | aluminium running board step plate with ribber rubber insert. the aluminium frame is not polished, but is drilled for mounting screws. the moulded step plate insert is black ribbed. dimensions approx 315mm long, ends 131mm and 104mm (front edge of step tapers) with 48mm high rear upstand which can be cut off if required. offered in pairs only (1 left hand + 1 right hand). |
£66.30 for 1 pair |
| 16400 | step plate with rubber insert | polished aluminium with ribbed rubber step insert pad. 290mm wide x 235mm deep with 60mm upstand to rear |
£24.25 for 1 each |
Category: Top / accessories / spring gaiter / | |||
| CA970 | Drevo / Denso tape | for `wrap-round' permanent spring protection. this is the only spring wrapping which provides a watertight cover, excludes grit and permanently maintains a thoroughly lubricated rust-free spring system. Drevo does not trap rust-forming moisture; it is a grease retaining watertight cover which protects the metal against all forms of corrosive action. each roll measures 50mm wide x 10 metre long. some guide of the quantity required can be taken from the maker's figures, but this will obviously depend on the amount of overlap used when binding the springs. (please note weight of 810gm each roll when ordering to calculate mail costs). for cars up to 10hp possibly 3 rolls, cars over 10hp order 4 rolls |
£9.38 for 1 roll |
| 544 | Wefco leather spring gaiter | fhese gaiters are manufactured to individual order for any car, to your measurements. please complete the special measurement form (click here) for a quotation. delivery variable 2 weeks to 4 weeks, so please allow time for manufacture. Wefco gaiters are supplied as standard with straps for fastening, and without lubricators, but original type lacing and lubricators can be supplied if specified on order. APPROXIMATE cost is shown for small pieces. all have Wefco badge fitted as original. |
£135.00 for 1 per spring |
Category: Top / accessories / steering wheel, wheels and hub nuts / | |||
| CA1339 | Bluemel Brooklands pattern steering wheel | remanufactured quality Brooklands pattern Bluemel steering wheel as fitted throughout the period 1930 to 1960 to numerous vehicles. current applications also on sports and kit car. the part is manufactured from the original Bluemel tooling, 17" (approx 430mm) diameter. stainless steel spokes with chrome separators and black OR ivory outer moulded grip. supplied without centre - to be ordered separately. |
£155.00 for 1 each |
| CA1339S | Bluemel Brooklands pattern steering wheel Black | small pattern remanufactured quality Brooklands pattern Bluemel steering wheel as fitted throughout the period 1930 to 1960 to numerous vehicles. current applications also on sports and kit car. the part is manufactured from the original Bluemel tooling, 15.5" (approx 395mm) diameter. stainless steel spokes with chrome separators and black outer moulded grip. supplied without centre - to be ordered separately. |
£173.00 for 1 each |
| CA1339S-W | Bluemel Brooklands pattern steering wheel Ivory colour | small IVORY colour pattern remanufactured quality Brooklands pattern Bluemel steering wheel as fitted throughout the period 1930 to 1960 to numerous vehicles. current applications also on sports and kit car. the part is manufactured from the original Bluemel tooling, 15.5" (approx 395mm) diameter. stainless steel spokes with chrome separators and ivory outer moulded grip. supplied without centre - to be ordered separately. |
£183.00 for 1 each |
| CA1339A | centre boss for Brooklands wheel | we offer choice of centre boss for the Bluemel Brooklands steering wheel, all are polished aluminium body (overall 81mm diameter) with chrome plated cente. (please note that none have facility for turn signal or horn). key way pattern, centre hole measures approx 18.5mm - key way 6.4mm, with pinch bolt for tightening - used on pre war MG (J, P, L, N, TA). spline pattern, centre hole measures approx 18.5mm, without pinch bolt - used on MG TC spline pattern, centre hole measures approx 18.5mm, with pinch bolt - used on MGA, plain pattern spline for Morgan up to 1971. please note that the centre engraved plate can be turned if plain centre required. |
£85.00 for 1 each |
| CA1298 | copper/hide wheel nut mallet | original Thor 40mm (1.5'') copper/hide wheel hammer for use removing wheel spinner nuts etc. |
£17.50 for 1 each |
| CA1187 | octagonal wheel nut spanner | octagonal wheel nut spanner for taking off the wheel retaining hub nuts that have no 'ears'. hexagon measures 3" (76mm) across flat. |
£7.25 for 1 each |
| CA1399 | tyre valve cap - plated | chrome valve cover cap that fits on to the tyre valve (including modern type). we offer plain rounded top pattern or alternatlivly that with a raised top with slot for valve removal. |
£0.48 for 1 each |
Category: Top / accessories / stoneguards / | |||
| CA810 | 10 inch headlamp stoneguard | quality flat headlamp stoneguards 10" (approx 254mm) diameter, which are attached by 3 knurled nuts to the headlamp rim which needs to be drilled. chrome on brass, sold in pairs only. also available in nickel plate on brass. |
£142.00 for 1 pair |
| CA811 | 12 inch headlamp stoneguard | quality flat headlamp stoneguards 12" (approx 305mm) diameter, which are attached by 3 knurled nuts to the headlamp rim which needs to be drilled. chrome on brass, sold in pairs only. also available in nickel plate on brass. |
£160.00 for 1 pair |
| CA1152 | 7 inch convex headlamp stoneguard | 7-inch (178mm) domed convex stoneguards for the standard 700 series classic car lamps. stainless steel. held in position with three clips which locate behind the headlamp rim (no drill holes required), supplied in pairs only. |
£12.95 for 1 pair |
| CA808 | 8 inch headlamp stoneguard | quality flat headlamp stoneguards 8" (approx 203mm) diameter, which are attached by 3 knurled nuts to the headlamp rim which needs to be drilled. chrome on brass, sold in pairs only. also available in nickel plate on brass. |
£118.00 for 1 pair |
| CA809 | 9 inch headlamp stoneguard | quality flat headlamp stoneguards 9" (approx 228mm) diameter, which are attached by 3 knurled nuts to the headlamp rim which needs to be drilled. chrome on brass, sold in pairs only. also available in nickel plate on brass. |
£124.00 for 1 pair |
Category: Top / accessories / transfers, signs and posters / | |||
| AA.sign | AA alunimium sign | cast aluminium AA wall sign (supplied unpainted) approx 320mm wide x 394mm tall |
£22.50 for 1 each |
| BP.sign | BP aluminium sign | cast aluminium BP wall sign (supplied unpainted) approx 242mm wide x 241mm tall |
£22.50 for 1 each |
| CA1164gam | Montaut print | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm.
|
£15.00 for 1 each |
| CA1164coup | Montaut print - Coupe des Voiturettes | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm. Coupe des Voiturettes - 1908 1 Nauclin, 2 Sizaire, 4 Lebouc sur Voiturettes Sizaire & Naudin
|
£15.00 for 1 each |
| CA1164gra | Montaut print - Grand prix de l'a.c.f | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm. Grand prix de l'A.C.F Rigal sur Bayard-Clement 1er. des voitures Francaises
|
£15.00 for 1 each |
| CA1164ita | Montaut print - Italiana | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm. L'Aquila Italiana au Tour de France
|
£15.00 for 1 each |
| CA1164peug | Montaut print - Peugeot | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm. depicts Peugeot
|
£15.00 for 1 each |
| CA1164tar | Montaut print - Targa Florio | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, quantity is limited, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, size 889mm x 445mm. Targa Florio 1913 (1050km) Mazzaro gagnant la Coupe de l'A.C. de Palerme
|
£15.00 for 1 each |
| CA1164 | Montaut prints - set of six | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, and offer a superb glimpse of Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, all the same size 889mm x 445mm. the full set of prints is 6 different Montaut prints. |
£60.00 for 1 set |
| CA1164A | Montaut prints small set | we have superb Montaut motoring theme reprints which are exclusive to Complete Automobilist. these were commissioned from originals some years ago, and offer a superb glimpse of veteran and Edwardian style motoring art. these prints are fabulous in that they show all the early essence of speed. close study reveals the artists talent for pictorial detail. we only offer these prints unframed, all the same size 306mm x 203mm. the full set of prints is 30 different Montaut prints, or alternatively we offer a selection of 10 different Montaut prints. (please note the selection is made at our discretion, we do not make a set of ten from prints selected by the customer). these offer superb value - at only £2.00 each print!!
|
£60.00 for 1 set |
| CA806 | Pratts transfers (pair) | `Pratts' transfers for fuel cans etc. copied for that authentic touch. |
£7.00 for 1 pair |
| CA852 | Rudge Whitworth transfer | Rudge-Whitworth transfers. add the finishing touch to Rudge-Whitworth wheels with these self-adhesive transfers. faithful copies of the originals in red/gold. |
£3.00 for 1 each |
| Shell.sign | Shell alunimium sign | cast aluminium Shell wall sign (supplied unpainted) approx 240mm wide x 242mm tall |
£25.00 for 1 each |
| CA807 | Shell transfers (pair) | reproduction transfer of the original Shell mark for fuel cans etc. |
£7.00 for 1 per pair |