| Product # | Name | Description | Price |
Category: Top / lamps / dashboard / | |||
| CA-1397 | Avanti Map light | Flexible Map ready light essential for those night time rallies! With a single push on/off button and black rubber coated. The over all length is 38cm. Comes with a clip to hold the head when not in use. |
£27.50 for 1 each |
| CA-1397A | Butler Map light | The original Butlers Map light! 38cm long, chrome metal neck with a single push on/off button. The bulb is inside a retractable sheath that can be used to focus or widen the light beam. Limited stock! |
£34.50 for 1 each |
| 397 | dash lamp | chrome top dash lamp, panel fixing through 19mm hole. basic switch incorporated with twist cap. |
£17.20 for 1 each |
| 543 | dash lamp | pull out dash lamp, all brass construction, 57mm long with 51mm diam mounting flange. requires separate switch. |
£51.60 for 1 each |
| 593 | dash lamp | cylindrical dash lamp, black bakelite ends, chromium centre tube 25mm diameter and clip. 90mm long. |
£39.40 for 1 each |
| CA40 | dash lamp | bracket mount type dash or panel lamp. mounting plate 23mm x 65mm (can be cut smaller) with lamp fitted. stainless steel cover (pulls off to change bulb) and basis switch. application also Ford model A 1930/31 |
£17.20 for 1 each |
| 289 | dash lamp Lucas DF41 | type DF41 lamp, chromium cowl with 'Lucas' emblem stamped on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. basic switch incorporated with twist cap. |
£36.00 for 1 each |
| 352 | dashboard illumination lamp | nice dashboard lamp with helmet cover. fits through metal dash hole approx 17mm. overall 46mm tall x 26mm wide when fitted. top cover pulls off to change bulb. no switch in this unit. black finish only. |
£25.75 for 1 each |
| 352A | dashboard illumination lamp | nice dashboard lamp with helmet cover. fits through metal dash hole approx 10mm. overall 57mm tall x 25mm wide when fitted. top cover pulls off to change bulb. basic switch on stem side. dull plated chrome finish only. the mount bolt at rear will fit though 23mm panel thickness. this is a somewhat basic lamp and the finish is not polished, but it offers a good alternative where dash space is limited. |
£37.95 for 1 pair |
| 842 | ignition/indicator lamp | ignition warning lamp, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole), |
£11.00 for 1 each |
| 419 | panel warning light | small panel mount warning lamp with metal rim which unscrews to change bulb. 13.4mm diameter. 12 volt 2 watt BA7 bulb fitted, push fit into a 13.4mm panel hole. twin wires to rear |
£2.85 for 1 each |
| 0609 | panel warning light | small panel mount warning lamp with metal rim 16mm diameter. 12 volt 2 watt BA7 bulb fitted, push fit into a 13mm panel hole. 6.3mm push on rear terminal connection. to change bulb the bulbholder simply pulls out from the rear. |
£2.70 for 1 each |
| CA1235 | warning light - panel mount | dash or panel warning lamp with metal bezel (diameter 22mm). rear body black plastic, fits through 16mm panel hole (maximum 12mm thickness), secured with nut. wire screw terminals on rear. no bulb supplied - order MES 10mm mini screw. |
£6.20 for 1 each |
Category: Top / lamps / head and spot / | |||
| SFT576 | 576 fog lamp | classic Lucas SFT576 fog lamp, freestand base mount. approx 146mm diameter. block type glass lens with chrome centre knob, all chrome body. a quality reproduction item. supplied with 12 volt bulb |
£59.00 for 1 each |
| WFT576 | 576 fog lamp | classic Lucas WFT576 fog lamp, rear mounted. approx 146mm diameter. block type glass lens with chrome centre knob, all chrome body. a quality reproduction item. supplied with 12 volt bulb |
£59.00 for 1 each |
| SLR576 | 576 spot lamp | classic Lucas SLR576 spot/driving lamp, freestand base mount. approx 146mm diameter. plain glass lens with chrome centre knob, all chrome body. a quality reproduction item. supplied with 12 volt bulb SOLD OUT |
£59.00 for 1 each |
| WLR576 | 576 spot lamp | classic Lucas WLR576 spot/driving lamp, rear mounted. approx 146mm diameter. plain glass lens with chrome centre knob, all chrome body.a quality reproduction item. supplied with 12 volt bulb. |
£59.00 for 1 each |
| CA1246 | chrome plated headlamp unit | freestanding chrome plated headlamp unit fitted with 12 volt lamp unit (main/dip). lamps measure approx 182mm diameter x 140mm deep overall. single 12mm bolt mounting. supplied in pair (2 piece) only. we offer these lamps for either left dip or right hand drive vehicles OR right dip for left hand drive vehicles. 6 volt units are available at additional cost - please enquire for details. |
£78.00 for 1 pair |
| CLR700 | driving lamp CLR700 | freestanding long range beam driving/spot lamp approx 184mm across x approx 90mm deep. convex plain glass lens with central chrome knob as pattern and style of Lucas CLR700 lamp. single bolt mounting to base. polished stainless steel rim and body. a quality reproduction item. supplied with 12 volt bulb |
£66.00 for 1 each |
| SFT700 | fog lamp SFT700 | freestanding fog lamp approx 184mm across x approx 90mm deep. near flat block pattern glass lens as pattern and style of Lucas SFT700 lamp. single bolt mounting to base. polished stainless steel rin and body. a quality reproduction item. supplied with 12 volt bulb |
£66.00 for 1 each |
| 55213 | Fog Ranger lamp | classic Lucas 5FT Fog Ranger freestanding lamp. approx 156mm diameter. block glass lens, all chrome body. a quality reproduction item. supplied with 12 volt bulb |
£53.00 for 1 each |
| 55232 | Fog Ranger lamp | classic Lucas 5WFT Fog Ranger rear mounted lamp. approx 156mm diameter. block glass lens, all chrome body. a quality reproduction item. supplied with 12 volt bulb |
£59.00 for 1 each |
| 55212 | Fog Ranger spot lamp | classic Lucas 5FT Fog Ranger freestanding spot lamp. approx 156mm diameter. plain glass lens, all chrome body. a quality reproduction item. supplied with 12 volt bulb |
£53.00 for 1 each |
| CA1279 | headlamp - stainless steel (pair) | large polished stainless steel headlamp units. approx 255mm diameter x approx 135mm deep. single mounting bolt, cables enter from lower rear. patterned shallow dome glass lens. offered in 12 volt only. price per pair (two pieces) |
£299.00 for 1 pair |
| 357 | headlamp bowl | headlamp bowl for standard 7" (700) units, plastic back shell (will not rust) complete with plated retaining rim holder, adjusters and bowl to body sealing ring/gasket |
£14.70 for 1 each |
| 786 | headlamp unit | free standing headlamp unit with single mounting stem bolt, metal bucket back, chrome rim, approx 190mm overall diameter. a solid and robust unit which has various applications. we offer this part in polished stainless steel finish at £68.00 piece or black body with chrome rim, 12 volt '700' seal beam drive and dip unit unit, with or without side pilot light. 6 volt are available at greater cost. glass lamp unit fitted by works to allow base mounting of lamp. |
£64.00 for 1 each |
| 786S | headlamp unit | small free standing headlamp unit with single mounting stem bolt, metal bucket back, all chrome, approx 150mm overall diameter. a solid and robust unit which has various applications. 12 volt seal beam drive and dip unit unit, with or without side pilot light or with single beam only. 6 volt are available at greater cost. ALL left hand drive units have a pilot (NO option of no pilot) glass lamp unit fitted by works to allow base mounting of lamp |
£64.00 for 1 each |
| 357A | Lucas pattern headlamp bowl | metal Lucas type headlamp bowl for standard 7" (700) units. three adjuster, supplied with metal back shell, chrome retaining rim holder, adjusters and bowl to body sealing ring/gasket |
£25.00 for 1 each |
| PL700 | Lucas PL headlight unit | replacement part Lucas PL style 700 (7") tripod bar headlamp unit. supplied with 12 volt halogen bulb. opening for side light bulb. RIGHT HAND DRIVE only. offered in pairs only (2 pieces) |
£55.00 for 1 pair |
| 357-700 | pre focus headlamp unit and mount kit | Lucas marked pre focus 700 headlamp unit, complete with metal wing mounting bowl, adjuster screws, 12 volt bulb, retaining rims and gasket seals. |
£47.00 for 1 each |
| 570B | Raydyot base mount spot lamp | Raydyot base mounted spotlamp, chrome plate on brass lamp to original pattern, approx 115mm diameter, with adjustable mounting arm and bracket with handle. |
£126.00 for 1 each |
| 570P | Raydyot type spot lamp | Raydyot pillar mounted spotlamp, chrome plate on brass lamp to original pattern, approx 115mm diameter, with adjustable mounting arm and bracket with handle. |
£126.00 for 1 each |
| 570M | Raydyot type spot lamp with rear view mirror | Raydyot pillar mounted spotlamp with rear view mirror made to original patten, chrome on brass. approx 115mm diameter, pillar mounted on adjustable mounting arm and bracket |
£147.00 for 1 each |
| CA1410 | small driving lamps | chrome body smaller driving lamps, approx 125mm diameter. single bolt (10mm) fixing with wire. shallow back as the total depth of the unit is about 70mm including the dome glass front. sold in 2 piece set only. note these are offered in 12 volt only. |
£37.50 for 1 pair |
Category: Top / lamps / indicator / | |||
| CA1293A | chrome warning/indicator lamp | very small chrome warning/indicator lamp with amber lens. (40mm x 25mm x 40mm depth). please note that this unit accepts MBC bulbs, which do not have the watts available for 21w/42w electric flasher units. probably more suited for mechanical flasher unit. |
£12.60 for 1 each |
| 932 | indicator lamp | small lamp of modern manufacture particularly suitable for flashing indicator use. chrome plated body with amber lens. body approx 58mm diameter x 70mm long. single mounting stud. single contact BA15s bulbholder fitted. |
£9.50 for 1 each |
| 993 | indicator lamp | flush back indicator lamp approx 72mm rubber back, stainless steel rim and amber plastic lens. uses a festoon bulb. a useful lamp where indicators are required without the need to cut large holes. two mounting bolts to rear. also offered with red lens for rear and clear lens for side. |
£7.75 for 1 each |
| 288ind | indicator lamp | indicator lamp of vintage appearance, modelled to match the Lucas rear lamp type 582. amber plastic lens 55mm dia, body 58mm long x 42mm diam, overall length 92mm. black body. we have commissioned production of this lamp to enable older vehicles comply to the modern traffic conditions, with a period looking flash indicator lamp. accepts BA15d indicator bulb. |
£21.00 for 1 each |
| CA1293 | indicator lamp with amber lens | free standing chrome body rectangular indicator lamp with amber lens, lens 60mm x 45mm. mounting by single 10mm bolt through which wire passes. fitted with 12 volt 21watt bulb. |
£12.60 for 1 each |
Category: Top / lamps / indicator / side or rear / | |||
| 298 | side/indicator/rear lamp | recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, glass lens (25mm depth from mount pamel), choice of amber, red or clear. Lucas model 488 with flat lens, mounts through 35mm panel hole. |
£15.95 for 1 each |
| 299 | side/indicator/rear lamp | recessed lamp (approx 72mm diam) - rubber boot/body, chrome rim, glass lens (45mm deep). choice of amber, red or clear. Lucas model 594 with raised lens. panel hole for fixing 35mm. |
£15.95 for 1 each |
Category: Top / lamps / number plate illumination / | |||
| CA1383 | dash or number plate lamp | small metal covered lamp with opaque plastic lens for varios applications. base 70mm x 33mm, t screw fixings 51mm apart. lamp body protrudes approx 25mm |
£6.80 for 1 each |
| 329 | L469 number plate lamp | remanufactured reverse / number plate lamp of Lucas L469 pattern. chrome on brass with frosted main lens. 163mm x 40mm x 60mm deep. two mounting bolts to rear 77mm centres |
£82.00 for 1 each |
| E83W-13550-B | number plate lamp | number plate lamp fitted with 12volt bulb, black finish dimensions 98mm long, 55mm wide and 50mm tall. 45mm mounting bolt centres. cover held by two slotted raised head countersunk screws. |
£27.50 for 1 each |
| 952 | number plate lamp | chrome cowl shields glass lens, as Lucas model type L534. base approx 60mm x 40mm. |
£18.00 for 1 each |
| 708 | number plate lamp type L467 | as Lucas model 467 as fitted to numerous vehicles. base 112mm x 49mm x 45mm high, fixing studs 85mm centres, clear side lens. |
£21.70 for 1 each |
Category: Top / lamps / parts and spares / | |||
| CA1165 | acetylene gas lamp burner | acetylene gas burners for carbide lamps offered as shown. these are new old stock and the brass will show some tarnish marks. as shown on the bigger image: left - threaded base (taper thread from 6.7mm to 8.5mm), marked 10 litres (discount available on 10 pieces) for rear or side lamp. centre - plain base (tapers from 10.3mm to 11.2mm), maked No 5, 6 burner holes for headlight right - threaded base (taper thread from 6.5mm to 8.4mm), marked 7.5 for rear or side lamp we do have a few other 'different' burners - enquire with your request. |
£5.00 for 1 each |
| 378BRC | BRC lamp plaque | BRC lamp oval plate - engraved copper. marked B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA measures 59mm x 26mm |
£11.00 for 1 each |
| 422 | bulb holder | single ended bulb holder. rear nut removes to expose terminal contacts. double contact. |
£10.35 for 1 each |
| CA605 | bulb holder | useful bulbholder (BA15) with bracket, which can be bent as necessary. offered in single contact or double contact. |
£6.40 for 1 each |
| 254 | bulb holder plug | plug for SBC type holder, double contact. also offered in single contact. |
£5.80 for 1 each |
| 153 | bulbholder | replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations. single contact parallel pin, double contact parallel pin, double contact offset pin. (pin reference is to the side locating pins on the bulb) |
£6.65 for 1 each |
| 424 | bulbholder | double contact bulbholder for our 297 (Lucas 1130) sidelamp, accepts double contact SBC Ba15d bulbs |
£10.70 for 1 each |
| 516cav | CAV lamp badge medallion | reproduction CAV badge. nickel plate brass casting with lugs on rear to peen over and secure as original. we stock the following size (measured across outside of badge). 22mm diameter. please note that a smaller hole is required for fitting. |
£4.60 for 1 each |
| CA-265A | Chrome cover | Chrome on Brass cover for the 265 lamp |
£9.80 for 1 each |
| 767G | D lamp base gasket | body to base gasket for D Lamp |
£0.75 for 1 each |
| 767GS | D lamp front gasket | glass to body gasket for split lens D Lamp |
£0.75 for 1 each |
| 767S | D lamp replacement red lens | replacement red glass for split D lamp |
£8.50 for 1 each |
| 177 | D lamp rim for Lucas model 288-3 box lamp | replacement chrome finish D lamp rim (Lucas 523333) for the Lucas box type 288-3 rear number plate lamp on the rear number plate box assembly. this is retained by a side hinge pin, and retained shut with screw knob stud. supplied as a kit of part (rim, retaining screw 523316, rubber gasket 523323 and glass retaining clip 523324 as shown). we do not include the lens. measures approx 102mm x 76mm (glass 95mm x 70mm) |
£27.00 for 1 each |
| 767A | D lamp side lens | clear side lens for number plate window for D Lamp |
£3.25 for 1 each |
| 767W | D lamp wire clip | glass retaining wire for D Lamp |
£1.60 for 1 each |
| A-13040-S | dome head bolt kit | shallow dome head lamp base repair kit. approx 11mm diameter across head, stem approx 4.5mm thread x 12mm long. polished stainless steel, supplied with hex nuts. per packet of 12 parts suitable for using fixing bonnet panels to hinge. |
£4.85 for 1 pack |
| 253 | double end bulbholder | double contact holder which accepts a plug or standard SBC bulb at either end. threaded outside body. we also offer this item in single contact guise |
£10.45 for 1 each |
| 361A | front lens ring seal | rubber rens O ring for our 297 (Lucas 1130) sidelamp. |
£0.45 for 1 each |
| 853 | headlamp bulb holder | double contact headlamp converter for most Lucas headlamps which are mounted through the rear of reflector bowl (usually held in place with clamp clip not supplied). |
£6.75 for 1 each |
| 863A | headlamp rim catch | chromium rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. |
£7.00 for 1 each |
| 863B | headlamp rim catch | chromium plated rim catch, for Lucas head lamps, short style, ooverall dimensions 31mm long x 27mm wide, use with wire 864 |
£6.35 for 1 each |
| E04C-13016 | headlamp rim catch | chrome plate bracket. |
£4.50 for 1 each |
| 864 | headlamp rim clip wire | spring (spectacle shape only) for rim using short rim catch clip |
£1.58 for 1 each |
| E1ADKN-13047/50 | headlamp rim screw and nut | chrome plated |
£5.00 for 1 each |
| 632 | headlamp stem nut | hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). (approx 16mm bore) |
£2.00 for 1 each |
| 632B | headlamp stem nut Lucas RB160 type | brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc type lamp. thread 1/2" x 26 tpi as Lucas part 500357 |
£2.50 for 1 each |
| 629C | headlamp stud - Butler type | headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread). measures approx 68mm long x 16mm thread diameter. |
£6.00 for 1 each |
| 629D | headlamp stud - CAV type | headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter. |
£6.00 for 1 each |
| 629B | headlamp stud - early Lucas | headlamp mounting bolt (hollow) with loose collar. thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter. |
£6.00 for 1 each |
| 629A | headlamp stud - late Lucas | headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 56mm long x 16mm thread diameter. |
£6.00 for 1 each |
| 629E | headlamp stud - P100, P80, RB160 | P100, P80, RB160 headlamp mounting bolt. thread 1/2" x 26 tpi ( fine thread) as original. measures approx 85mm long x 13mm thread diameter (thread runs for 24mm). |
£6.00 for 1 each |
| visor | headlamp visor | headlight peak for 7" lights, stainless steel, clips behind inner headlight rim. |
£8.10 for 1 pair |
| 642 | headlamp W wire | W wire clip to hold glass into headlamp rim, approx 35mm long |
£0.52 for 1 each |
| 642L | headlamp W wire - P100 type | large W wire for holding glass into rim, approx 60mm long side. this clip is actually made for P100 lamps. |
£1.45 for 1 each |
| 628 | lamp entry grommet | rubber lamp entry cable grommet. approx 13.5mm internal diameter. |
£1.95 for 1 each |
| 695 | lamp Lucas medallion | red dot Lucas medallion for our 297A (Lucas 1130) sidelamp. |
£2.20 for 1 each |
| 632A | lamp mount nut | hexagonal nut for Lucas type lamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore. |
£2.00 for 1 each |
| 631 | lamp mount stud and nut | lamp mounting bolt (hollow). thread 7/16" x 26 tpi ( fine thread) as original. measures approx 36mm long x 11mm thread diameter. supplied with hexagon nut. used on various Lucas spot and sidelamps. |
£6.25 for 1 each |
| 787A | lamp mounting rubber | rubber mounting pad for our 787 (Lucas 516 sidelamp) |
£1.60 for 1 each |
| 642A | long headlamp W wire clip | large W wire spring clip for holding glass into rim. approx 62mm long side. useful for deep headlamp rims. |
£0.70 for 1 each |
| CA1283 | Lucas enamel badge | large LUCAS enamel badge (4 colour), for tops of some larger Lucas lamps, 19.3mm wide x 22.5mm tall. offered in chrome or nickel (please specify). |
£9.50 for 1 each |
| 516luc | Lucas lamp badge medallion | reproduction Lucas King of the Road badge. chrome plate (nickel to order) brass castings with lugs on rear to peen over and secure as original. we stock the following sizes (measure overall diameter of badge). reference A - very small - 15.75mm £4.10 each reference B - small - 16.76mm £4.10 each reference C - medium small - 19.70mm £4.40 each reference D - medium - 22.73mm £4.60 each reference E - large - 28.88mm £5.00 each please note that a smaller hole is required for fitting. |
£4.10 for 1 each |
| 927 | MBC bulbholder | MBC bulbholder, useful general application spare for minaiture base cap bulb |
£1.75 for 1 each |
| 357-PF | pre-focus headlamp connection with lead | pre-focus headlamp connector with lead, double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall length 910mm. |
£10.00 for 1 each |
| 570base | Raydyot lamp base only | base mounting bracket for Raydyot spotlamp. (fits in place of side mounting arm). approx 65mm overal diameter, chrome on brass. |
£12.00 for 1 each |
| 570A | Raydyot lamp mounting arm only | replacement side mounting bracket for Raydyot spotlamp. approx 106mm overall, chrome on brass. |
£35.00 for 1 each |
| 776S | rear lamp side lens | spare clear side lens for round 'Pork Pie' rear lamp. |
£2.50 for 1 each |
| CA1190B | red lamp STOP lens | all glass red lens for Duolamp lamp with embossed Stop on top part. |
£9.00 for 1 each |
| 288L | red lens for L582 lamp | replacement red plastic lens with brass inner screw thread for our 288 lamp, equivalent to Lucas L582 |
£6.00 for 1 each |
| LR576 | replacement 576 lamp unit - driving | replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). plain dome lens with chrome centre dot. order bulb separately - single contact type base P22s |
£29.00 for 1 each |
| FT576 | replacement 576 lamp unit - fog | replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). block pattern dome lens with chrome centre dot. order bulb separately - single contact type base P22s |
£29.00 for 1 each |
| 361 | replacement front lens | plastic front lens for our 297 (Lucas 1130) sidelamp. |
£6.00 for 1 each |
| 681 | replacement front lens | original pattern frosted lens with chrome rim for our 297 (Lucas 1130) sidelamp |
£11.00 for 1 each |
| 570G | replacement glass lens | replacement front glass lens for Raydyot spot lamp 570. measures 104mm diameter. |
£5.00 for 1 each |
| 211L | replacement lens | replacement glass lens for 211 Duolamp, specify all red or split amber/red |
£9.00 for 1 each |
| 776R | replacement lens | spare red glass lens for round 'Pork Pie' rear lamp, specify flutes running as picture vertical OR horizontal |
£5.00 for 1 each |
| CA1247L | replacement oval lens | replacement red colour main front lens for lamp |
£12.75 for 1 each |
| 516rot | Rotax lamp badge medallion | reproduction Rotax badge. chrome plate (nickel to order) brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge). very small - 14.77mm £4.10 each small - 18.34mm £4.60 each medium - 22.00mm £4.60 each large - 25.60mm £5.00 each please note that a smaller hole is required for fitting. |
£4.10 for 1 each |
| 357-SB | sealed beam headlamp connector with lead | sealed beam headlamp connector with lead, nylon block three lucar connector, three wires with headlamp bowl sealing grommet and soldered bullets, overall length 850mm. |
£5.75 for 1 each |
| 215 | semaphore arm | semaphore (orange) plastic blade to fit Lucas SF80 trafficator, (equivalent part 532026). |
£6.25 for 1 each |
| 215B | semaphore arm backing | polished stainless steel backing for SF80 trafficator. |
£6.25 for 1 each |
| 865 | side lamp rim retain screw | top rim retaining screw for Lucas 1130 type sidelamp. |
£1.30 for 1 each |
| 424A | sidelamp bulbholder (twin bulb) | two bulb (yellow for flasher, clear for sidelamp) - 12 volt ONLY - bulbholder for fitting into Lucas type 1130 sidelamps. supplied in pairs only with a spare amber bulb. |
£41.50 for 1 pair |
| 642s | small lamp wire | small w wire clip for sidelamps, packet of 6 pieces |
£1.80 for 1 packet |
| 577rim | spare lamp rim | replacement chrome plated lamp retaining rim for Lucas L471 type rear lamps |
£4.00 for 1 each |
| 250 | spare lens | domed red or amber main lens for our 257 lamp. base 60mm diameter measured overall. |
£4.50 for 1 each |
Category: Top / lamps / parts and spares / rubber parts / | |||
| 619 | headlamp bowl gasket | headlamp bowl to body rubber gasket for all two screw adjuster 7" (700 type) lamps. |
£4.50 for 1 each |
| 620 | headlamp rim seal | 700 series headlamp glass to rim rubber dust gasket. |
£4.00 for 1 each |
| 298G | lamp rubber body | rubber rear body (boot) for Lucas 488 model lamp. Ford part ref E0A-13216 |
£3.40 for 1 each |
| 299G | lamp rubber body | rubber rear body (boot) for Lucas 594 model lamp. |
£3.20 for 1 each |
| 643 | mounting pad | flat rubber mounting pad for Lucas 1130 type sidelamp. |
£1.20 for 1 each |
Category: Top / lamps / rear / | |||
| 103E-13404/5 | 103E rear lamp (complete) | new complete lamp units as fitted to the ford 103E and 104E, comprising of new lens, new base with double contact bulb holder for rear and brake light (bulb reference No. B380 (12 volt) B382 (6 volt), new mounting pad and stainless steel machine screws. this lamp has no retaining rim, lamp as fitted to the original car. sold as a pair (2 pieces) only. |
£86.10 for 1 pair |
| E93A-13407 | angled wing mounting rear lamp | angled wing mounting stop/tail lamp, as supplied by the ford motor co. for fitting to the E93A Prefect 1939 - 1948. supplied as a "ready to fit" lamp along with template for hole drilling, 61mm x 149mm base x 53mm height (not including mounting base). usefull period lamp which has uses for other vehicles. order bulb seperately. sold per pair. |
£103.25 for 1 pair |
| 210 | Butler rear lamp | Butler kidney shape rear lamp, base 122mm wide x 72mm high. painted metal cover (60mm deep) with red glass lens and clear side number plate window. opens with clip. new old stock |
£42.00 for 1 each |
| CA1177 | divers helmet rear light - (pair) | diver's helmet tail lamp. 5 cm lens diam and overall diameter about 9cm. similar to the old CAV, Rotax and Lucas models. sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. double contact bulbholder and plug in base. require equal pin bulbs. we offer these lamps each fitted with either two red and one clear glass for stop/read OR alternatively with three amber lens for indicator. please specify. |
£345.00 for 1 pair |
| 211 | Duolamp rear lamp | round rear lamp with split amber/red glass lens. polished stainless steel 97mm diameter x 51mm deep. two single contact bulbholders fitted through back. all red lens available as alternative. also choice of with or without side number plate illumination. |
£26.00 for 1 each |
| 959 | lamp cable outlet cover | stainless steel cover for rear of doulamp type lamp |
£6.80 for 1 each |
| 356 | lucas model L494 lamp | remanufactured rear lamp as Lucas type L494 part. chrome finish on cast body with chrome plated fittings. offered with either clear glass lens (for reverse) OR red glass lens (for rear/rear fog light). body size 140mm wide x 75mm high x 68mm deep. mounting stem approx 13mm. bulbholder BA15s. |
£35.00 for 1 each |
| A-13406 | number plate bracket | licence plate/number plate bracket which bolts under rear lamp. available in polished stainless steel or black enamel finish |
£11.25 for 1 each |
| 288A | rear lamp | early pattern cylindrical rear lamp with side number plate illumination, as Lucas type 582. fitted with prismatic glass lens and metal rim. 45mm dia x 93mm overall, body 42mm dia. choice of finish - black, nickel or chrome double contact offset pin bulbholder. mounts through 20mm panel hole. |
£39.50 for 1 each |
| 577 | rear lamp | angle mounted rear lamp similar to Lucas 471 type glass lens approx 57mm deep, chrome bezel. base approx 127mm x 62mm. |
£33.25 for 1 |
| 259 | rear lamp | a useful rear lamp, which we would refer to as 'Miller type' lamp. used on motorcycles, but offering useful applications as additional number plate illumination etc. the prismatic red lens (32mm diameter) has chrome rim, the black metal body ( 44mm diameter) has side number plate illumination. double contact bulbholder (stop/rear) bulb possible. the mounting flange (approx 65mm diam) ghas three holes for fixing. it is designed so that the portion of lamp protrudes behind mounting flange by 23mm. the bulbholder is accessed by twist off rear flange body. |
£19.75 for 1 each |
| 901 | rear lamp 'owl lamp' | "Owl Eye" Rear lamp, reproduction from our own tooling of Lucas type 312 lamp, chrome plated finish on brass pressings, supplied with red with white or amber (as shown) main lenses. number plate illumination on underside. size approx 152mm wide x 105mm tall x 65mm deep. please note that the main large lenss can be interchanged for fitting to left or right of vehicle. |
£313.20 for 1 each |
| 958 | rear lamp black body | single red lens duolamp, stainless steel rim 97mm diam, black body 60mm deep. one double contact bulbholder. with or without number plate illumination. |
£26.00 for 1 each |
| CA836 | rear lamp bracket | steel rear lamp bracket suitable for divers helmet rear lamp and similar requiring spade mounting. this part is prefabricated and supplied undrilled. overall height approx 125mm. fitting to the car (rear chassis cross member) can be by using a U bolt, the spade can be drilled if required to thread the rear lamp bolt through. |
£12.20 for 1 each |
| 53330 | rear lamp Lucas L549 | rear stop/rear lamp as Lucas L549 for mounting on to sloping rear wing panel. red plastic lens. chrome base plate with flat back rubber mounting pad. base 85mm x 142mm. applicable Morgan, MGA, Triumph TR etc, |
£17.30 for 1 each |
| 875 | rear lamp mounting bracket | mounting bracket (with rubber pad and bolts) for mounting 211/958 lamps away from wing. chromium plated. available for left or right of car. measurement long the 'underside' when fitted approx 105mm. |
£18.00 for 1 each |
| 776B | rear lamp ST38 | round 'Pork Pie' rear lamp, as Lucas ST38, fitted with emblem. 90mm diameter x 65mm deep, brass body, red glass lens, with clear side lens. three single contact bulbholders. black enamel finish. |
£31.50 for 1 each |
| 776C | rear lamp ST38 | round 'Pork Pie' rear lamp, as Lucas ST38, fitted with emblem. 90mm diameter x 65mm deep, brass body, red glass lens, clear side lens. three single contact bulbholders. chromium finish. |
£35.00 for 1 each |
| 776BC | rear lamp ST38 with chrome rim | round 'Pork Pie' rear lamp, as Lucas ST38, fitted with emblem. 90mm diameter x 65mm deep, brass body, red glass lens, with clear side lens. three single contact bulbholders. black finish to body, chrome pated rim. |
£33.00 for 1 each |
| 249 | rear lamp ST51 | 'D' Lamp full red glass lens, fitted with double contact bulbholder (for stop and tail lamps) brass body 92mm x 85mm x 60mm. clear side number plate illumination lens. black enamel finish. |
£36.00 for 1 each |
| 428 | rear lamp ST51 chrome | 'D' Lamp full red glass lens, fitted with double contact bulbholder (for stop and tail lamps). brass body 92mm x 85mm x 60mm. clear side number plate illumination lens. chromium finish. |
£37.00 for 1 each |
| 249A | rear lamp ST51 split lens | early pattern 'D' lamp with split red glass lens, fitted with two bulbholders. brass body 92mm x 85mm x 60mm. clear side number plate illumination lens, black enamel finish. |
£52.00 for 1 each |
| 428A | rear lamp ST51 split lens | early pattern 'D' lamp with split red glass lens, fitted with two bulbholders. brass body 92mm x 85mm x 60mm. clear side number plate illumination lens, chromium finish |
£52.00 for 1 each |
| CA1265 | rear lamp stainless body | single red lens duolamp, stainless steel rim 97mm diam, stainless steel body 60mm deep. one double contact bulbholder. with or without number plate illumination. |
£31.50 for 1 each |
| 288 | rear lamp type L582 | legal version of a very popular vintage Lucas rear lamp type 582 with side number plate illumination. red plastic lens 55mm dia, body 58mm long x 42mm diam, overall length 92mm. black body as standard, but nickel or chrome available also at additional cost. double contact offset pin bulbholder. mounts though 20mm panel hole. |
£27.50 for 1 each |
| 978 | rear or reversing lamp | polished stainless steel (110mm x 55mm x 80mm deep) with glass lens. single bolt fixing allows choice of mounting. single contact bulbholder (21w max bulb). choice of clear lens for a reversing lamp, or red lens for an auxillary rear lamp. |
£19.25 for 1 each |
| 255 | rubber divers lamp | rubber divers helmet lamp - approx 70mm diameter body, supplied with red flat main lens, clear side window. double contact bulbholder fitted, enabling use of double filament bulb. amber lens available as alternative. we fit one red side lens if red front lens fitted. |
£33.00 for 1 each |
| 257 | rubber lamp | a neat rear lamp, with single mounting which can be supplied with a flat lens instead of the domed (red or amber) lens fitted, to give a lamp of vintage appearance, into which 5w bulbs only will fit. double contact bulb holder. we have a limited stock of new old part of original Rubbolite manufacture (as opposed to the remanufactured items) which we offer as an alternative at a higher cost of £29.40 each |
£24.20 for 1 each |
| 291 | rubber lamp Rubbolite 23 | round Rubbolite number 23 rear lamp - 91mm diameter at widest with raised red lens and side number plate illumination lens. two double contact bulb holders fitted offering various bulb applications. a very useful lamp into which user can fit two 21 watt bulbs. base 73mm diameter (with rear protruding bulbholders) x 74mm deep. |
£29.50 for 1 each |
| 291A | rubber lamp Rubbolite 25 | round Rubbolite number 25 rear lamp with flat back - 91mm diameter at widest with raised red lens and side number plate illumination lens. two double contact bulb holders fitted on an inside plate offering various bulb applications. a very useful lamp into which user can fit two 21 watt bulbs. base 83mm diameter (flush with two mount bolt and cable entry) x 84mm deep. |
£26.00 for 1 each |
| CA1249 | ST38 rear lamp conversion | round 'Pork Pie' rear lamp, as Lucas ST38, converted for combined stop/rear/indicator function. 90mm diameter x 65mm deep, split red/amber lens, with clear side lens. the bulbholders are modified to fit specials bulbs for all three functions to work. offered in black enamel OR chrome plate ( at greater cost) finish. spare bulbs available from us. |
£64.20 for 1 each |
Category: Top / lamps / rear / reflector / | |||
| CA1426 | large chrome reflector | large chrome rimmed reflector approx 71mm diameter overall. single centre screw fitting as Lucas type RER14. rubber backing has slight curve to follow radius of panel. |
£12.50 for 1 each |
| 240 | reflector | angled rubber red reflector, as Lucas type RER2, for mounting on to sloping rear wings etc. base measure approx 74mm diameter. we have a limited stock of new old part of original Lucas manufacture (as opposed to the remanufactured items) which we offer as an alternative at a higher cost of £8.50 each |
£7.00 for 1 each |
| 872 | reflector | round red reflector with deep chromium surround as Lucas type RER25, rubber back, flat, screw fixing. approx 51mm base diameter. also offered in polished brass. |
£9.00 for 1 each |
| 919 | reflector | large flat back rubber surround reflector approx 90mm diameter. screw fixing around edge, for those who want reflectors that can be seen. |
£5.50 for 1 each |
| E187-NC-1 | reflector - rear stud thread | red reflector, diam 58mm,integral threaded stud fixing. |
£8.40 for 1 each |
| 167 | reflector flat rubber | flat rubber surround for vertical surfaces as Lucas type RER6. self tapping screw for mounting supplied, approx 48mm base diameter. |
£7.00 for 1 each |
| 179 | reflector with bracket | metal surround original Lucas reflector (42mm dia) with black metal painted side mounting bracket (7mm hole) |
£8.50 for 1 each |
| E80-NC-1 | reflector with rear stud | rear red reflector with metal surround with rear mounting stud and nut supplied. approx 42mm diameter. |
£8.25 for 1 each |
| 394 | reflector with rim | red reflector with a shallow surround as Lucas type RER5, rubber back. screw/bolt, choice of chromium, nickel or polished brass rim. overall diameter of base approx 53mm. |
£8.00 for 1 each |
Category: Top / lamps / side / | |||
| 297ind | 1130 type side/indicator lamp | internally modified torpedo style sidelamp, reproduction of the Lucas 1130 type, chromium plated on brass body approx 100mm long x 38mm diameter, clear plastic lens held with screw in top, the internals of this lamp have been modified to accept two individual modern bulbs which provide a clear side lamp and an amber flashing lamp, mounted by two bolt in base. rubber mounting pad supplied. 12 volt bulbs supplied only |
£47.25 for 1 each |
| 592 | large sidelamp type VS45 | large sidelamp similar to Lucas type VS45, 90mm diameter x 85mm deep, with glass lens. we offer these lamps finished with black body/chrome rim, all chrome or all nickel. mounting bolt 14mm diameter. these units will accept parallel pin double filament 5/21w bulbs thus indicators can be incorporated within the sidelamp. |
£66.00 for 1 each |
| 918 | sidelamp LD109 pattern | reproduction of Lucas LD109 side lamp, approx 51mm diameter x 63mm long, with red medallion in top , frosted lens. can only be used as sidelight (MBC bulbholder) |
£32.25 for 1 each |
| 297 | sidelamp Lucas 1130 type | torpedo style sidelamp, reproduction of the Lucas 1130 type, chromium plated body approx 100mm long x 38mm diameter, plastic moulded lens (choice of clear or amber). double filament bulb holder (allows combined side and flasher bulb to be fitted),mounted by two bolt in base, rubber mounting pad supplied. |
£33.25 for 1 each |
| 297B | sidelamp Lucas 1130 type - chrome medal | torpedo style sidelamp, reproduction of the Lucas 1130 type, chromium plated body approx 100mm long x 38mm diameter, frosted clear lens with chrome rim held with screw in top, double filament bulbholder (allows combined side and flasher bulb to be fitted), chome Lucas emblem in top, mounted by two bolt in base. rubber mounting pad supplied. |
£44.50 for 1 each |
| 297A | sidelamp Lucas 1130 type - red dot medal | torpedo style sidelamp, reproduction of the Lucas 1130 type, chromium plated body approx 100mm long x 38mm diameter, frosted clear lens with chrome rim held with screw in top, double filament bulbholder (allows combined side and flasher bulb to be fitted), red dot emblem in top, mounted by two bolt in base. rubber mounting pad supplied. |
£44.50 for 1 each |
| 787 | sidelamp Lucas type L516 | small chromium plated side lamp as Lucas type 516, fitted to A30, Morgan etc. 81mm long x 32mm dia. supplied with rubber mounting pad. uses MBC bulbs, max 3watt |
£33.00 for 1 each |
| 52139 | sidelamp model Lucas L489-1 | clear glass sidelamp with heavy chrome rim (approx 63mm overall). glass lens, rubber back boot supplied. accepts single contact MBC bulb. as fitted to early Morris Minor, Land Rover, Wolseley etc. note that boot and bulbholder protrude through panel approx 55mm. |
£26.50 for 1 each |
| 393 | sidelamp type L490 | remanufactured side lamp to Lucas L490 pattern as used on Jaguar Mk2,early XK and Armstrong Siddeley amongst others as Lucas part 52474. clear patterned lens with chrome rim (30mm diameter x approx 7mm deep) which fits into body housing on vehicle. offered with single contact BA9 bulbholder. overall length approx 61mm (intrusion into body approx 55mm) |
£30.70 for 1 each |
| 392 | sidelamp type L513 | remanufactured side lamp to Lucas L513 pattern as used on Jaguar XK150 and Daimler amongst others as Lucas part 52175. clear patterned lens with chrome rim (45mm diameter x approx 12mm deep) which fits into body housing on vehicle. offered with double contact bulbholder. overall length approx 95mm (intrusion into body approx 80mm) |
£37.00 for 1 each |
| CA1010A | torpedo sidelamp | torpedo shape sidelamp, brass finish only. the domed glass lens on a screw rim. body 151m long x 76mm diameter, base 90mm x 31mm with mounting holes at 68mm centres. this lamp has a plain top, has a single contact bulbholder. offered in pairs only. it must be pointed out that plating these lamps to a good standard is very difficult due to slight imperfections and thinning of metal in working and the polishing only makes the metal thinner. we offer these as they come at a reduced price to reflect the condition against what we would expect for perfect items. we can supply a double contact terminal block at no extra charge which can be fiddled in place of that fitted. |
£175.00 for 1 pair |